OP
Knobhead
The OP is not an electrician
No help from me then.
Discuss Can I put a piece of twin and earth on some concrete? in the DIY Electrical Advice area at ElectriciansForums.net
The OP is not an electrician
No help from me then.
As Tell says there are zones for running cables in and an electrician would not be able to sign the work off if you do it.
The cable must be RCD protected and have a conductive earthed shield or armour, and can be buried at any depth providing adequate mechanical protection is afforded. The OP would seem to have has several options assuming it was already RCD protected. FP200 buried just below the surface covered with a length of steel trunking lid, or T&E through an earthed steel 20mm conduit would probably be the easiest,
It may not be conventional, or follow custom and practice, It may not even be 'wise', but is it precluded by regulation?
Reply to Can I put a piece of twin and earth on some concrete? in the DIY Electrical Advice area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.