Discuss Couple of Pics from my recent PIR on a takeaway in the Australia area at ElectriciansForums.net

another quality install there. reminds me of a pub we did up your way with cables round the window sills. the lad on site banged a screw at the side of the window and it went bang :D his face was a picture needless to say it all came out and got re done
 
btw whats wrong with the jb in pic 8? :rolleyes::p all the cpc`s are inside it unlike a few i have seen in the past where they are wrapped all over the outside :)
 
Its good compared to some of the installs I have seen over here in France, at least you have a CU.

I looked at one house and the meter tails went straight into a junction box which then had feeds to various lights and sockets with all of the cables twisted together. I suppose the only good part was that they had used tape to insulate.
 
oh by the way phil that woul dbe the JB to a lighting circuit that had no CPC other than some mods added recently..! but overall ni CPC back to 2 way box!
 
OMG what a ** superlative mess ..who did the job in the first place Ray charles ? Is this common to find ? Surely it only takes a tad longer to run the cabling neatly and use the correct fittings etc.

Very Informative

Thx 72-van
 
I don’t know about remedial for the electrical, I think a call to the health inspector is due. But not until you’ve been paid!
 

Reply to Couple of Pics from my recent PIR on a takeaway in the Australia area at ElectriciansForums.net

Similar Threads

I'm taking a look at the 120v wiring in an old travel trailer that I recently bought, and plan to live in full time soon. It has some quirks that...
Replies
2
Views
848
Good evening. Any advice what to do in this situaltion would be very much appreciated. I was called by a landloard who lives in Denver . She...
Replies
39
Views
5K
N
Hi... I purchased this circular saw bench locally for a good price and while it works great the switch on it has worried/annoyed me from the off...
Replies
9
Views
3K
Noods
N
M
Hi all. This is my first post. I'm in need of some help. This one has stumped most of the blokes on site. All wiring seems fine. However, when...
Replies
4
Views
1K
H
Hello everyone! I'm new, so if I make any faux pas, please excuse me. I am working as an architectural intern in Amsterdam at the moment and...
Replies
8
Views
2K
cos90
C

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock