Discuss Fault finding on ring final circuit in the UK Electrical Forum area at ElectriciansForums.net

Bradley if your doing your AM2 my only advice is if you locate a fault but don’t think it could be that simple don’t panic or over think things. One of the faults we had thrown at us was a blown lamp on a lighting circuit. And yes you couldn’t remove said lamp to test it properly. I will have a look through some of my books to see if they have pics and easy explanations for you.
Thanks I’ve done build today have 1 circuit left and then testing and then fault finding either tomorrow or wednesday
 
.. Fault finding is a key skill, learnt on the job, from others .....
Welcome to the 21st century, where real-world simulation software can train and test you on electrical troubleshooting (Fault finding) by creating so many simulated faults for you to troubleshoot, it would take you literally years to gain that experience OJT. (Our mother company sells the electrical troubleshooting training and testing software series.)
 
I find it is easiest to break the ring in the middle and also at the board. You are then left with two radial circuits, easier to work with.
Yeah that’s what I did I passed everything else but failed fault finding when I was doing ring I was looking for either cross polarity or open or short circuit and believe it or not the fault was a high resistance took me ages to find it
 
Bradley if your doing your AM2 my only advice is if you locate a fault but don’t think it could be that simple don’t panic or over think things. One of the faults we had thrown at us was a blown lamp on a lighting circuit. And yes you couldn’t remove said lamp to test it properly. I will have a look through some of my books to see if they have pics and easy explanations for you.
Why not?.....that's the fault.
 
If a lamp has blown you'll get no difference to any readings, L and N are clear anyway. Are you testing each switch circuit to see if lamps are OK?.....so basic it's weird!
 
If a lamp has blown you'll get no difference to any readings, L and N are clear anyway. Are you testing each switch circuit to see if lamps are OK?.....so basic it's weird!
No idea my fault was on intermediate lights was the lights wasn’t working as a intermediate should and the fault was no continuity between of the strappers on the last switch
 
No idea my fault was on intermediate lights was the lights wasn’t working as a intermediate should and the fault was no continuity between of the strappers on the last switch
So, was it incorrectly connected, a faulty switch connection or a damaged/broken conductor?
 
Welcome to the 21st century, where real-world simulation software can train and test you on electrical troubleshooting (Fault finding) by creating so many simulated faults for you to troubleshoot, it would take you literally years to gain that experience OJT. (Our mother company sells the electrical troubleshooting training and testing software series.)

Bold statements in here, not that it would really help ....

Are you here advertising?
 
Bold statements in here, not that it would really help ....

Are you here advertising?
It'd be useful for a house basher, that....millions of fault possibilities, some, I'm sure, completely unheard of, even by the boffins.
 

Reply to Fault finding on ring final circuit in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Please advise what I should test / check next. My usual qualified electrician who did all of the work here is in Ireland for 4 weeks and not...
Replies
45
Views
3K
Hi guys. Having a weird problem in a house that has suddenly happened. One half of the ring main has 240ish volts (fluctuates of course), and...
Replies
9
Views
494
What would be the fault with a very high Zs at all sockets on a ring main, the sockets are an average of 68.10 . The lights are.67 and the is...
Replies
7
Views
683
Hi all, After some options/opinions on fault finding N/E fault on ring final as fairly newish to being out alone. Customer wants to upgrade from...
Replies
7
Views
1K
  • Question
Hi there, I’m a new member to the forum and felt like I could do with some additional insight into a fault I came across on a call-out at the...
Replies
6
Views
498

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock