Handy Stuff for Commercial Installations

[Dustydazzler]

This sort of kit:

Milwaukee M18FQID-502X M18 FUEL SURGE Hydraulic Impact Driver

Milwaukee M18FQID. 18 volt cordless brushless 1/4 inch hex hydraulic impact driver. Constant 50Nm torque. The Milwaukee SURGE impact driver for quieter impact self tapping screws. UK equivalent for US Milwaukee Tool 2760-22. Milwaukee 4933451791.

www.bigredpowertools.co.uk

Is that for consumer unit

 

[i=p/u]

Am curious about the Armeg "impact" holesaws. In what way do they differ from standard holesaws?.

On a separate note, I recently was alerted by a poster here to a multitool blade for cutting plaster and brick. The pictures of the cutout box looked really neat. That's the next buy on my list

They are brilliant just a little tad expensive to me. But no doubt I'd lift one if heading to metal munch

 

[IAmSparkytus!]

Am curious about the Armeg "impact" holesaws. In what way do they differ from standard holesaws?.

I've got a few of these, they're best used on sheet metal really. Fuse boards, metal trunking etc. They're only maybes 20mm deep, have a flared end which prevents you from pushing the holesaw further inside after the hole has been drilled, and they have a spring which shoots the metal back out to stop it getting clogged up.

Can use them on other materials if you need to avoid hitting cables etc but plastic and wood will get stuck inside like a standard holesaw.

 

[Sparky Pat]

One recent discovery/conversion for me is Flexishield cable.

An obvious use-case is for cables in walls where you don't want RCD protection, but you want something a lot easier to wrangle than SWA. Another is for cables clipped on walls where you might have rats, etc, and so PVC T&E or rubber is not good, as they don't seem to like Flexishield. They even make a cat-urine flavoured version of it for really problematic areas (farms, etc)

Flexishield R How It Works

Flexishield R How It Works

www.flexcables.co.uk

But the normal stuff is good for many industrial/commercial applications as it looks fairly neat if clipped to walls and is stiff-ish so stays in place. It is similar to FP cable but really rated for nail penetration RCD trip action.

I like the look of this cable , particularly the rodent retardent version, could well be something that I could use . Thank you pc 1966 for the heads up.

 

[i=p/u]

We love your input pc66, happy Saturday man.

 

[Timbo]

They look the dogs proverbials! - They are.
How much do they cost? - See link below.
Do they only connect 2 twin and earths - Up to 4, see link below.
or can they connect say 2 twin and earths along with a flex to a light fitting for example? - See link below.
And do they make them for 3 core and earth? - Not yet.

See responses inserted above.

QUICKWIRE CONNECTORS

Complete range of Quickwire Junction boxes and accessories.

www.superlecdirect.com

 

[LewisM]

Have been thinking about getting a torque screwdriver recently. Can you recommend one? Are they expensive?

I'm a nightmare for losing tools so tend to avoid screwdriver sets with interchangeable heads!

Im also interested to know, and you'll probably be able to tell me, whether the torque drivers make things more or less tight than someone would tend to make things with a standard screwdriver?

The Wiha one is very good, goes from 1nm-5nm I find its handy for double checking everything is good, I do all connections with just a normal screwdriver then nip them up with the torque screwdriver that way no connection is missed.

 

[Dustydazzler]

The Wiha one is very good, goes from 1nm-5nm I find its handy for double checking everything is good, I do all connections with just a normal screwdriver then nip them up with the torque screwdriver that way no connection is missed.

I must admit I don't own a torque screwdriver , but do keep one eye on ebay for one going cheap.
I have borrowed one to use but never felt like parting with £100 just for one

 

[nicebutdim]

I must admit I don't own a torque screwdriver , but do keep one eye on ebay for one going cheap.
I have borrowed one to use but never felt like parting with £100 just for one

Might be worth keeping an eye on Amazon warehouse deals. Quality stuff isn't usually discounted too much, but if it sits for a while there can be some decent bargains.

 

[timhoward]

You may already have one, but the endoscope cameras for 30 to 50 euro are worth their weight in gold for domestic work. Being able to see what's above a ceiling or under a floor, in a stud wall, BEFORE drilling gives, great piece of mind.

I'm looking at getting one of these. I'm considering the "depstech wifi camera". (The Ferret Camera looks awesome but can't justify that money really.)