Discuss High Efficiency fluorecent fittings in the Electrical Tools and Products area at ElectriciansForums.net

Reaction score
4
Hi guys

Been asked by a friend to replace the fluorecents in his industrial unit he has seen some high efficiency fluorecent fittings installed in another building which have a very narrow tube! Im struggling to find such fittings can anyone point me in the right direction.

Than you ashley!
 
Sounds like a T5 fitting you are after, it's a very narrow linear tube.They are in HE (high efficiency) and HO (high output)Because the tube is so narrow they can be a bit bright on the eyes if the tube is in field of view without a diffuser
 
Excellent thanks for the help! Difusers are a must as i require a good IP rating as they are being installed above ironing equipment that release steam! Any advice how to Suspend waterproof flourecense from the roof while still maintaining the IP rating???

Regards Ashley!
 
New install so didn't replace anything and were at 6 meters

Ok thanks, got some low bays to change soon,and looking for a more economic replacement. looking at alternatives for energy saving and have though about these as an alternative. height is about five meters.

Considered Led's but do'nt know if they are as good as they are cracked up to be.
 

Reply to High Efficiency fluorecent fittings in the Electrical Tools and Products area at ElectriciansForums.net

Similar Threads

Hi guys I have some industrial lighting circuits to wire in a workshop and was after some fresh ideas/suggestions as to how i could best do this...
Replies
12
Views
1K
Hi all, Disclaimer: I'm not an electrician and have very basic knowledge of electrical installation. We've been putting in a new kitchen into an...
Replies
17
Views
2K
Hi all, Im new to the forum and wanted to check something and maybe get some advice confirmation. Ive got halogen wall lights which use a...
Replies
6
Views
1K
I have been asked/invited to "post more", lol, so let me make another post right away. I thought of sth worthy to post, of interest to many, I...
Replies
1
Views
436
Hi guys. This will be a straightforward answer for anyone who works with aluminium tubing on a regular basis. I don't I'm afraid hence my asking...
Replies
5
Views
780

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock