Discuss Is this likely to be asbestos? in the UK Electrical Forum area at ElectriciansForums.net

Reaction score
55
Cut this out of a kitchen wall. Like a cement board on a steel frame house. 1950s build . 20201007_180543.jpgSome kind of mesh in the middle.

Should I get it tested?
 
Don't cut it at all, spraying is not going to save you, get a specialist in the test it in-situ and stay away from the area and post notices't to the effect that the area is dangerous until you know otherwise.
 
I can't believe that in the 21st century anyone can be so unaware of the dangers of Asbestos and the transfer of fibres from them to everyone around them, did you dispose of what you where wearing at the time or did you put them in the linen basket with your wife and children's clothes.
 
As said get it tested, before you do anything else.

You can carry out non-licensed removal yourself, HSE. But personally I wouldn’t touch the stuff.
 
I can't believe that in the 21st century anyone can be so unaware of the dangers of Asbestos and the transfer of fibres from them to everyone around them, did you dispose of what you where wearing at the time or did you put them in the linen basket with your wife and children's clothes.
As luck would have it the washing machine is bust atm.
 
As luck would have it the washing machine is bust atm.
I think you missed the point, by the time it's in the machine it may have spread the fibres into the atmosphere in the house, they can float and hover like dust.
My Grandad died of the lung disease associated with asbestos due to one day interaction with the stuff in his career of 45yrs, there were several blokes assigned to demolish a old boiler room at work 25yrs ago, all but one of them have died from the condition for 1 days work, no one else in the factory of hundreds were affected.
I personally know I have been drilling through it and ripping it out in my early career, long before we were made aware through company policy and site practices, I get a lug checkup every 10yrs now to ensure no shadows are showing.. by the time it affects your health it is often too late.
 
Why am I not surprised he missed the point, the dangers of Asbestos exposure can not be over emphasised, if you ever see the precautions taken by the professionals, with airlocks into a connected container with a dirty side in where the clothes (full body covering) are stripped off and disposed of, then into the decontamination unit and then into a shower.

My wife's music teacher (Barry Cole) died of Asbestosis over forty years after the exposure, demolishing a pre-fabricated building with his farther when he was a teenager, he was a successful saxophonist with many records to his name.
 
It's bad news when you cut it and the fibres are airborne but its not novichok. Wore a proper mask, put it in a bag.
Erm in the picture it's not in a bag?! You think your smart coming out with novichok ref and in another post regarding your faulty washing machine......
However you come across rather dumb to me in your unprofessional approach.
 
Back and forth aside I thought this was quite useful. Realistically as a domestic electrician who works in the middle of buildings being renovated I've probably been exposed to it unknowingly more than once. On this occasion the whole ceiling and half the wall had already come down. Hence why I thought it would be a good idea to get a piece and get it tested before agreeing to rewire the kitchen.

https://asbestos-surveys.org.uk/unc...ure-is-dangerous-the-answer-may-surprise-you/
 

Reply to Is this likely to be asbestos? in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

An old and now deceased friend's place has some rewirable fuses with asbestos flash pads. They are long overdue for replacement and now that seems...
Replies
9
Views
765
Doing some work in a commercial restaurant/kitchen the builders had already boarded and plastered the walls meaning my only viable route is to use...
Replies
31
Views
1K
Evening all, Due to growth within the business we are looking for additional electricians to come on board to service upcoming contracts...
Replies
0
Views
241
I have been asked to change cu from old fuse board which has 6 fuses. Only 4 fuses are used. The first fuse feeds cooker circuit. This is not used...
Replies
17
Views
819
Looking for some advice and timescale here. I'm not an electrician just a tennet with a housing association. I've been offered top floor flat in a...
Replies
6
Views
488

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock