S
Sam cook
Hello all
I'm a commercial/industrial sparky and got roped into changing a couple of flood lights for led for a family member. They supplied some nice cheap fittings from Homebase. I've installed a gang ip rated switch, 1 switch per led flood light.
When switched off, one led flood light glows slightly. Now I usually install Ansell, thorn, thoroux, design plan lighting for work and have never seen this. Lighting circuit is original t and e direct feed from lighting feed joint box in loft. It's a tt earthing system and there is 20 volts between phase and neutral when circuit is isolated.
What would be the best fix, should I replace fittings with decent led floods or can I get away with fitting snubbers?
Many thanks
Sam
I'm a commercial/industrial sparky and got roped into changing a couple of flood lights for led for a family member. They supplied some nice cheap fittings from Homebase. I've installed a gang ip rated switch, 1 switch per led flood light.
When switched off, one led flood light glows slightly. Now I usually install Ansell, thorn, thoroux, design plan lighting for work and have never seen this. Lighting circuit is original t and e direct feed from lighting feed joint box in loft. It's a tt earthing system and there is 20 volts between phase and neutral when circuit is isolated.
What would be the best fix, should I replace fittings with decent led floods or can I get away with fitting snubbers?
Many thanks
Sam