Maximum cable length.........??

[mickytuff]

Good afternoon all, firstly im pretty rubbish at cable calcs. My question is this, the load on the circuit is 6.6kw for a outdoor ev charger so the cable would be clipped direct. Using 4mm NYY cable is ok subject to the cable length, any ideas on the maximum cable length before having to use 6mm. All suggestions/advice greatly received :drunk:

 

[telectrix]

think you have to dissassociate the earthig from the house and TT the charger. need to have a look at the amendment.

 

[Gavin A]

ps, re volt drop calcs, I'd think the customer for an EV is unlikely to be into wasting energy, and it will be used daily for large amounts of energy flow, so personally I'd be working to 1% losses or lower.

I doubt they'd be too impressed to find out that it was costing them 5% extra to charge their car up every time because the spark wanted to save a few quid by using the cheapest cable they could get away with.

 

[Gavin A]

think you have to dissassociate the earthig from the house and TT the charger. need to have a look at the amendment.

something like that - I was refraining from commenting on the contents as I've only skimmed it, and made a mental note to read it in detail if / when someone asks us to install one.

 

[GLENNSPARK]

Very true, thankyou Snowhead for your link, very handy tool. And I think this thread is going very ---- now, to suggest that most circuits installed aren't common cable sizes/breaker sizes is ridiculous.Take that how you want to.

these types of comments are tedious son...

i mean do you even have BS7671?

its all in there.....go look at it...

 

[Darkwood]

Missed the EV bit thats even worse i don't think a rule of thumb has been made for them yet!....

 

[ian.settle1]

Very true, thankyou Snowhead for your link, very handy tool. And I think this thread is going very ---- now, to suggest that most circuits installed aren't common cable sizes/breaker sizes is ridiculous.Take that how you want to.

See the op doesn't like comments being made about his post?

 

[GMES]

I am starting to understand things now, a person comes on here asks a basic question, because I presume they either they don't know the answer or can't be bothered to work it out, then when they get a few responses they don't like, they get the --- on and storm off.
Have I got it about right :rockon:

 

[dan86]

I am starting to understand things now, a person comes on here asks a basic question, because I presume they either they don't know the answer or can't be bothered to work it out, then when they get a few responses they don't like, they get the --- on and storm off.
Have I got it about right :rockon:

that's the way I see it

 

[amoeas]

If you rubbish @ doing cable calculations, you shouldn't be installing new circuits

 

[mickytuff]

I would like to thank you all for your suggestive opinions........many criticizing, some amusing. Lazy is true for asking rather than completing the calculation myself.

 

[mickytuff]

I make it 27 meters max using 4mm, then upgrade to 6mm.