Discuss MCB size and wire size for an electric oven and induction hob in the UK Electrical Forum area at ElectriciansForums.net
ThanksThe calculation that Brian did for you took into account both appliances.
Lol difficult as I am replacing the oven and hob only as the kitchen is already installed, so installing a new 10mm wire to allows for a second feed would be difficultSorry meant hob not job! Most I installed were separate, sometimes different manufacturers.
Thanks, just wanted to double check many thanksIn plain, simple English: Your existing supply cable and existing MCB are more than adequate for your new oven and hob.
Looking at it plus experience, but in the absence of that, measure the diameter of a conductor with callipers or a micrometer, and calculate the cross sectional area.Question how can you tell what size the cable is when it's not printed on the cable ?
Thanks I have attached some photos just to seeLooking at it plus experience, but in the absence of that, measure the diameter of a conductor with callipers or a micrometer, and calculate the cross sectional area.
Reply to MCB size and wire size for an electric oven and induction hob in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.