Hi guys
i have 2 honeywell programer and 4 wireless honeywell themostat and 4 motorised valves and 4 pumps (not yet installed)
i need it so that when i call for water the vaule opens and the pump turns on.
i have wired it using 5core .75 in the following way but still seem to be having problems
Programmer i have L E N and then 1 2 3 4 which i have used to sperate circiuts so hot water will be one and heating will be another
so coming out of 1 and 3 is one circiut ON and OFF and 2 and 4 the other circuit
at the stat i have my supply and a link over to common and my on and off coming out of B C
then before i get the the valve and pump i have an adaptable box
cables from value
N (blue) CW (black) CWW (brown) the black one coming from motorised valve
C (white) NO (red) NC (orange) is the grey cable
and pump is just L E N
i have connected at the adaptable box the following......
all N's
all e's
CW,NO,pump live - feed from B on stat
CWW,NC - feed from on stat
live,C
ive now been told I don't need the grey cable coming from motorised valve.
quite confused, defo isn't working as it should. first time doing this
any help would be appreciated
thanks alot
i have 2 honeywell programer and 4 wireless honeywell themostat and 4 motorised valves and 4 pumps (not yet installed)
i need it so that when i call for water the vaule opens and the pump turns on.
i have wired it using 5core .75 in the following way but still seem to be having problems
Programmer i have L E N and then 1 2 3 4 which i have used to sperate circiuts so hot water will be one and heating will be another
so coming out of 1 and 3 is one circiut ON and OFF and 2 and 4 the other circuit
at the stat i have my supply and a link over to common and my on and off coming out of B C
then before i get the the valve and pump i have an adaptable box
cables from value
N (blue) CW (black) CWW (brown) the black one coming from motorised valve
C (white) NO (red) NC (orange) is the grey cable
and pump is just L E N
i have connected at the adaptable box the following......
all N's
all e's
CW,NO,pump live - feed from B on stat
CWW,NC - feed from on stat
live,C
ive now been told I don't need the grey cable coming from motorised valve.
quite confused, defo isn't working as it should. first time doing this
any help would be appreciated
thanks alot