Hi all,
Been to look at some work my brotherinlaw wants doing in his new kitchen re-fit.
He is yet to supply me with all the specifications, so I can't do all the calculations as yet, but basically he wants to have an induction hob, two seperate single ovens, a steam oven, and built in microwave oven.
Initially I'm thinking that the Induction hob will be on its own circuit as its rating will probably be about 7500W, fed in 6mm to Isolator and then out to outlet point.
What would be the best way to supply the other 4 ovens ? Should I run a 6mm supply from the consumer unit to Isolator, and then loop in and out of 4 different outlet plates, or might it be better to have a local 4 way consumer unit in nearby cupboard, and have 4 x 16A mcbs supplying each appliance in 2.5mm cable ?
I appreciate you can't give exact advice without the ratings of the ovens, I just wanted to know the best way to wire up multiple ovens, as most installations I Have done before have just been one outlet point for a free standing oven, or a single oven and hob.
Thanks in advance for your help.
Been to look at some work my brotherinlaw wants doing in his new kitchen re-fit.
He is yet to supply me with all the specifications, so I can't do all the calculations as yet, but basically he wants to have an induction hob, two seperate single ovens, a steam oven, and built in microwave oven.
Initially I'm thinking that the Induction hob will be on its own circuit as its rating will probably be about 7500W, fed in 6mm to Isolator and then out to outlet point.
What would be the best way to supply the other 4 ovens ? Should I run a 6mm supply from the consumer unit to Isolator, and then loop in and out of 4 different outlet plates, or might it be better to have a local 4 way consumer unit in nearby cupboard, and have 4 x 16A mcbs supplying each appliance in 2.5mm cable ?
I appreciate you can't give exact advice without the ratings of the ovens, I just wanted to know the best way to wire up multiple ovens, as most installations I Have done before have just been one outlet point for a free standing oven, or a single oven and hob.
Thanks in advance for your help.