nazyv
-
- Reaction score
- 3
A friend of a friend is ripping out old kitchen units and replacing for new, they require an additional 4 sockets in the kitchen. After I confirm the kitchen has its own ring and the relevant checks the job will be splitting the ring at one socket and chasing down from that socket and then chasing back up 3 times for 4 sockets above kitchen worktop level at 3 different locations which also means chasing and installing back boxes. I will also leave enough cable to wire single oven point most probably in the new unit also isolate and disconnect 6mm from old all in one cooker and then connect 6mm to individual hob once worktops are in place. I will also leave enough cable to install surface mount socket in one of the units for a small fridge. There's also 3 existing sockets that are working but the back boxes are half visible because it was originally covered by 2 layers of tiles which have now been removed so they need to be chased deeper in the wall or most probably replaced for new back box. The customer has purchased all sockets and back boxes, I need to supply 2.5mm t&e cable etc. Any help with rough prices to work off would be a great help. Thank you