Discuss Need to add plug sockets in the UK Electrical Forum area at ElectriciansForums.net

maxrawson

DIY
Reaction score
4
Hi I have recently moved and I have only 1 plug socket in the living room where i need 8! I'd normally call on an electrician to sort it but I'm reluctant to do so at the moment purely due to covid19 so want to tackle it myself as I've currently using 2 fused extension leads in the1 wall socket (I know this is not a good idea). Would I be ok to use 2 x fused 4 plug converters? One in place of the current single plug in the ring main and 1 as a spur from the other? Ithink this would be the easiest/ cheaper option but obviously want to ensure it's safe. The plugs would be used to power low ampage items such as tv cable box router etc so should be well below 13 amps. If this would not be safe I'd really appreciate if someone can recommend the simplest alternative? Thanks
 
I've currently using 2 fused extension leads in the1 wall socket (I know this is not a good idea).

Why do you think this is not a good idea?
Fused, multi outlet extension leads are perfectly safe, just don't use those plug in, multiway, square block things, they are a bit sketchy.

Your best bet is to continue as you are until such time as you can get an electrician to carry out any work required.
 
As already said, get a professional in for putting in several sockets around the room, it will be done properly and tested, etc.

As a stop-gap, at most you could look at replacing the single socket with a double so you can more easily plug in a pair of 4-way or 6-way extension blocks. That should be fairly straightforward to do but you will need to make the hole bigger for a double-size back box.

Obviously you need to be very careful to properly isolate the power first, and also take care that the wires don't fall back behind the wall and out of reach while you are removing the old one and inserting the new back-box.

As a ring circuit there should be two cables joining at the back of it and you must take care they are all reconnected correctly. If you do not have one, get one of the plug testers to verify it is basically OK after any work.

Obviously a ~£10 tester is not going to do the same job as a spark's MFT costing £500-1000 but it should detect the worst of mistakes.
 
Why do you think this is not a good idea?
Fused, multi outlet extension leads are perfectly safe, just don't use those plug in, multiway, square block things, they are a bit sketchy.

Your best bet is to continue as you are until such time as you can get an electrician to carry out any work required.
Hi Dave thanks for the reply. I had read on another website that using a fused extention lead is fine as long as it doesn't exceed the 13 amp fuse, but that piggy-backing from one extension lead to another can overload the plug so is a potential fire risk?
 
As already said, get a professional in for putting in several sockets around the room, it will be done properly and tested, etc.

As a stop-gap, at most you could look at replacing the single socket with a double so you can more easily plug in a pair of 4-way or 6-way extension blocks. That should be fairly straightforward to do but you will need to make the hole bigger for a double-size back box.

Obviously you need to be very careful to properly isolate the power first, and also take care that the wires don't fall back behind the wall and out of reach while you are removing the old one and inserting the new back-box.

As a ring circuit there should be two cables joining at the back of it and you must take care they are all reconnected correctly. If you do not have one, get one of the plug testers to verify it is basically OK after any work.

Obviously a ~£10 tester is not going to do the same job as a spark's MFT costing £500-1000 but it should detect the worst of mistakes.
That's really useful advice thanks. Ive seen there are double plug conversion kits out there - double socket which fit into a single back-box so I wouldn't need to increase the hole (lazy I know). Do you know if these are these just as good? Thanks again for your help ?
 
One final thing to add - get a good quality socket (MK, Hager, British General, etc) especially if you want one with built-in USB charging.

Some of the cheap eBay style of stuff can be downright dangerous and they are energised all of the time!

If you look on YouTube I think John Ward has done a video on the internals of some of them (good and bad). Not the most exciting viewing perhpas but he is very informative and precise in the details.
[automerge]1588632193[/automerge]
That's really useful advice thanks. Ive seen there are double plug conversion kits out there - double socket which fit into a single back-box so I wouldn't need to increase the hole (lazy I know). Do you know if these are these just as good? Thanks again for your help ?
So long as you have enough cable to pull through to reach they will make your job much easier! Especially if its an old property with lath and plaster walls filled with horsehair that crumbles at the slightest touch!

If the wall is plasterboard then it is quite easy to get one of the "knife saw" sort of tools to make the hole bigger for the plastic clip-in style of boxes. Just take your time and take care to avoid damaging the cables when the saw is near them.

It is very unlikely, but if it is an odd hard thin-ish panel that is not clearly paster based or plywood DO NOT saw it but get it checked for asbestos first.
 
That's really useful advice thanks. Ive seen there are double plug conversion kits out there - double socket which fit into a single back-box so I wouldn't need to increase the hole (lazy I know). Do you know if these are these just as good? Thanks again for your help ?
As long as you are competent to change the single to a double that's OK. Isolate and check that the existing cables are long enough for the double extension box and make sure all terminals, including the earth, are thoroughly secure.
In your situation, I don't consider this a lazy option.

1588633141092.png
 

Attachments

  • 1588632992052.png
    109.8 KB · Views: 10
Last edited:
“Converta” sockets is one brand name, I’m sure there are more.

it is a lot of hassle breaking out a wall to take a double box, if you’re going to get it done properly at a later date. And if it’s a brick wall, you could be there for hours.

If you don’t mind me asking, how big is your house? One socket in a living room is very unusual, even for an old property.
How many sockets do you have in the kitchen?
 

Reply to Need to add plug sockets in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi All, We have an old Country villa in Spain. The housing electrics were not good so the house recently has been completely re-wired to a good...
Replies
2
Views
842
Hi, I'm installing a Hoover oven and would like a little help please. The oven code is HOC3158IN. The oven manual states "The power cable must...
Replies
9
Views
739
we just replaced our hot water tank with hot water on demand (natural gas) and still have the old power run for the tank which is 30a 240v. I...
Replies
1
Views
2K
Hi. I'm in the process of getting my qualifications and am taking on some small jobs for family to try and get some experience in. Today I was...
Replies
17
Views
877
Hi, I have purchased a piece of equipment from China and we are required to finish the final wiring. They have supplied a length of 3 core 6m...
Replies
4
Views
846

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock