No electric in my garage

[Specialist]

It's fairly common for terminal's to loosen & burn after a period of years, your electrician will sort it when the switch is replaced.

That's not an RCD by the way, it's a 100 amp main switch.

 

[Wilko]

Hi - post #43 - its hard to diagnose via the internet, but I think the cable is burnt (looking closely at the blue and red at the base) a sign of overload. In the house fuse board, what's the mcb rating that protects the black cable going to the garage?

 

[Dave OCD]

That is a switch that's overheated and failed not an RCD !

 

[gimpchop]

Its the one with garage above it in the off possition.

 

[Dave OCD]

That's an MCB at the supply end, hopefully that's fed via an RCD in your house Consumer Unit ? The rating would be fine for the cable feeding your garage but with the 3kW spa thing there wouldn't be much spare capacity at all. Also the main switch at the garage end board must have had a loose connection or an internal fault to overheat and fail like that.

 

[gimpchop]

Hope this helps.

 

[LankyWill]

That armoured is not even properly fastened to the board, get an electrician in to fix those few odd bits we picked up.

 

[Dave OCD]

Yes that's good, some will say not ideal as an earth fault in the garage will cause the loss of the other circuits supplied via that RCD, but the main thing is you have overcurrent and RCD protection for the garage.

 

[Octopus]

Why do I get the feeling we are not being told everything...

 

[Pete999]

Why do I get the feeling we are not being told everything...

Wondered that a while back, but thought nah can't be