K
kevinfran
What is the best way to confirm r2 and R1+R2 when the circuit is routed in conduit and this is used as the cpc?
I have used wander lead and got continuity at all points on the circuit for the cpc.
rn and r1 are within 0.03 of each other so no problem there.
just how to confirm that the circuit is wired correctly?
Hope this makes sense!!
I have used wander lead and got continuity at all points on the circuit for the cpc.
rn and r1 are within 0.03 of each other so no problem there.
just how to confirm that the circuit is wired correctly?
Hope this makes sense!!