Discuss Solutions for Surface mount to conduit. in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

If a door from a room leads away from a hazard to a place or route of safety it is deemed an escape route and from the picture I suspect it does.

As it has a closer I suspect it is an escape route. But why worry about the wiring with a flat screen TV mounted above the door? I'd worry more about that falling on my head as a fireman..

Would some metal conduit clamps over the plastic above the door be enough to be compliant?
 
Last edited:
As it has a closer I suspect it is an escape route. But why worry about the wiring with a flat screen TV mounted above the door? I'd worry more about that falling on my head as a fireman..

Would some metal conduit clamps over the plastic above the door be enough to be compliant?
Steel saddles are a solution and easy to retrofit.
You would be pushed to find any door which would not be part of an escape route in a commercial premises.
 
When ever I read Pat H's threads I always get the feeling we are not being told the whole story.........

What story do you want?
I'm not buzlightyear I'm afaid. Whoever that is.
 
What story do you want?
I'm not buzlightyear I'm afaid. Whoever that is.

On more than 1 occasion, in threads, its become clear after numerous replies that you eventually provide additional useful information.....

Your house or an unsuspecting customers?
 
On more than 1 occasion, in threads, its become clear after numerous replies that you eventually provide additional useful information.....

Your house or an unsuspecting customers?

Sorry if my eventual additional info is useful. (I think not really sure what that is)

read my profile info it tells all there is to tell.

I have posted posts related to my house and others related to customers or just general questions.
 

Reply to Solutions for Surface mount to conduit. in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Similar Threads

Grateful if someone could offer some advise, I'm struggling to find a definitive answer to this. I have a double socket, it was on the ring main...
Replies
8
Views
752
DIY'er question: I have a singe switched fused spur above my kitchen counter, providing power to an undercounter fridge socket beneath it. The...
Replies
2
Views
452
An odd question granted but bear with me. I've got to extend a radial circuit in a community centre to fit a new hand dryer in the toilets, but I...
Replies
15
Views
3K
Hi all, question on extending an existing ring main onto the surface and then re-joining back to in-wall. Is there a ‘correct way’ to do this, as...
Replies
5
Views
1K
Hi, New to the forum. I have two very specific questions, for the setup below. Setup details: Currently I have a setup with an outlet used for...
Replies
6
Views
639

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock