M
marty1234
when testing R1+R2 at main board then going to sockets to start my test i noticed the earth wire (cpc)twisted to gether on the socket . This was on every socket i tested would this give me wrong results
Discuss testing r1 +r2 in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
my pet hate is the 2 cpc's being twisted all the way back to the sheath and put in 1 piece of sleeve.
I'm a tester and inspector and if I see any cpcs twisted I go ape****,my pet hate as well,oh to all the sparks out there,stop putting both cpcs up one sleeve,****s up my readings.
Reply to testing r1 +r2 in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.