- Reaction score
- 25,512
Possible the blanks were there but fitting the cover was so awkward they dropped out and are inside.
Discuss What would you do? in the UK Electrical Forum area at ElectriciansForums.net
True.... but its still been left like that....Possible the blanks were there but fitting the cover was so awkward they dropped out and are inside.
Agree.What i expect would be that's where the old fusebox was sited..... and the gas meter was put in front of it.
Are these necessary? I had in mind that busbar barriers were a 'nice to have', but not a requirement, assuming all else being correct.Importantly, it needs the Wylex small yellow busbar insulators
I reckon so and they are supplied with, but you may be right.Are these necessary? I had in mind that busbar barriers were a 'nice to have', but not a requirement, assuming all else being correct.
I think it’s in the back ‘myth busting’ section of the good practice guide that specifically states that busbar protection covers do not need to be fitted, no code. The logic of course being that you need a tool or key to open the cabinet in the first place. But like most, it never sits well with me not to see them.I reckon so and they are supplied with, but you may be right.
I'll always fit 'em though, if only for the nincompoops (get that for a word)
who might stick an appendage in there.
Most manufacturers recommend them to be fitted. We are required to take that into account. If they had been fitted clearly it would have been safer with the blanks missing. Personally on a job like that I would be loathe to involve myself. First you are liable for the installation if you work on it. That is if you miss a safety item and do not address it, liability could run to you. Insurance would not cover any omissions.necessary?
Reply to What would you do? in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.