What’s your view on this installation that’s been passed

[phil 01]

Doing a small job today went to isolate lighting circuit

when I spotted the incoming mains supply, this was certified safe July 2019 for 5 years

 

[Dustydazzler]

Hmmmm, That is rough as ----

Who ever passed that needs a serious talking to

 

[James]

Definitely not fully compliant with the regs.

 

[telectrix]

Definitely not fully compliant with the regs.

agreed the label is head down,arse up..

 

[littlespark]

Some Swa have reinforced insulation…. Not as easy to slice with a blade like 6941x, but it is rough. Could have wrapped the yellow in earth tape.

Everything else is just yuk.

Sealant round the entry holes, bonding clamp on the armour… old old rccb

 

[timhoward]

Last time I saw one of these there was at least a wiska box on the end of the SWA before the single insulated cores said hello to the world.
And it did at least have tape marking the cores.

 

[DPG]

That's abysmal. At least gland it into a Whiska box.

 

[timhoward]

code 1 for me all day, the whole estate has had a conversion carried out where they change the house around moving the front door etc, so I imagine they are all the sameView attachment 93246

Not C1. Another thing needs to happen first to instantly cause electric shock if you touch it.
It's bad but it's not C1.

 

[Dustydazzler]

Agree to be a legit C1 you can touch exposed live parts

This install is rough as a badgers rough end but I couldn't give it a C1

C2 as single cores outside their prescribed enclosure