wylex

[Hawk]

Do wylex do a high integrity dual rcd metal consumer unit? I had a look on Google. But I need 15 usable ways for MCBs. Can't seem to find one. Screwfix do a 15 way one but it only accommodates 12 mcbs by the look of it.

 

[londonfire]

I have a new amendment 3 wylex board that is 15way (plus 2 RCDs) that I fitted in my house. So they do make them. Purchased from electric base.

 

[londonfire]

Or tlc
https://www.tlc-direct.co.uk/Products/WYNMRS15SSLMHI.html

 

[londonfire]

http://www.NoLinkingToThis/p/wylex-100a-15-way-metal-high-integrity-dual-rcd-consumer-unit/2503j

The write up on this is wrong it will take 15 mcb,s I have measured the one I fitted and it's the same width

 

[Hawk]

That's the one I was looking at. Is there room for 2 rcds a main switch and 15 mcbs?

 

[londonfire]

There is. I just tried to upload a pic with no joy.

 

[londonfire]

 

[londonfire]

It's the same one as the screwfix as its 430mm wide

 

[Hawk]

Happy days. That's what I need. Cheers mate.

 

[londonfire]

Was a joy to fit too. The sprint Glands are massive though for the tails so if your going in through the side nearest the wall you will need about a 6 inches of space

 

[londonfire]

https://www.tlc-direct.co.uk/Products/WKTKP40R32.html

 

[Hawk]

Wiska do a gland for 25mm tails and 16mm earth so might try it. Did you use glands for the t&e cables?

 

[londonfire]

I used 20mm glands that were about 20p each as the sprint ones were not about at the time

 

[telectrix]

I used 20mm glands that were about 20p each as the sprint ones were not about at the time

how did you get 3 tails in a 20mm gland?

 

[londonfire]

Sorry I used 20mm glands in the knock outs for the circuits. And the massive gland for the meter tails and earth