I discovered a blank face plate in our large food cupboard and thought- ‘if there’s wiring behind this then I could put a little microwave in there’
There is wiring. (See horrible photo) so I will wire in a single plug socket there.
Being a novice I wanted to check the following-
After...
Hello, I need some help. I'm building a plastic shredding machine for the charity I work for Atlantic Pacific International Rescue Ltd Atlantic Pacific - International Boat Rescue Project - https://www.atlanticpacific.org.uk/
. Its a Shredder Pro designed to Precious plastics specifications...
Hi,
I'm new to the site and wanted to seek some advice thanks, relating to adding fused spurs to existing ring mains in a commercial premises.
Some of my other colleagues have been asked to explore ring main alterations, but they look after some site based kit and this is more related to...
Hi,
I’m just looking for some advice/ someone to point me in the right direction please.
Basically I worked as an electrician for 5ish years from when I was 18 to 23. I’m 25 now and want to get back into electrics but the only qualification I currently have is the AM2.
Is anyone able to help...
Evening all 🙂
I have been asked to quote for installing infrared heating panels (smart) throughout a house. This will be a first for me and I thought I would talk it through on here.
In total 5.8kW. Top floor is 2.7kW (3 panels and a towel panel) and ground floor is 3.1kW (4 panels). These are...
Hello all,
I appreciate you taking the time to read my post.
After leaving school, I followed the typical university route. But, unfortunately, I have found myself at 27 years old, realizing that I would be far more satisfied in my work if I were in the electrical trade.
I have been...
Hi all,
New ill ( not used yet) of 7.5kw EV charge point.
New house consumer unit fitted 6months ago and fitted with 16mm tails as the main fuse was 80amp.
Electric company then come to visit to see if the...
Hi anyone got any advice on the best cable tracer
Currently we have a fluke tracer but it seems to pick up everything apart from the cable we are looking for
I have looked at Chauvin CA 6681 from RS but wanted to see if anyone has had a good experience with something similar
Thanks in advance
Have been asked by a customer to fit prepayment meters in a house divided into flats.
Not seen the job yet,but told each flat has a cu.Have been in contact with S P Wales,
who can supply digital meters,and prepayment cards,which the landlord sells to the
tenants.In the past have only fitted...
Hi All,
Newbie to the forum. I am planning to add solar power to my house and would like some advice regarding options with adding and inverter and/or EV charger to the garage/carport. The main switchboard is at the front of the house (townhouse) on the northern side, some 20m from the carport...
I recently tore down all the wiring in my grandfather’s garage he wired himself and i’m genuinely surprised it didn’t burn to the ground after 40+ years, but there’s some things I need some help with. He’s long gone so that’s that. First off, he only had 1 hot wire supplying 220v to his air...
Hi, looking for a bit of advice by those in the know.
Living in a rented property (sadly not cheap at all) and had so many issues within 4 months it's unbelievable.
Was just looking for a quick bit of advice in relation the pictures attached. Been advised by a friend in the building industry...
I'm a DIY'er helping a friend connect a 220v dryer to a 50 amp RV outlet.
The dryer has a Nema 10-30R plug and is in a shed about 4 feet from the 50 amp outlet.
I'm thinking about getting this cord to plug into the 50 amp outlet:
https://www.amazon.com/dp/B08WM3NRT1
And connect that to...
The Pump House for my Water Well is located way out in a field about 350 Ft from the house. It is wired with Romex 14-2 with a Ground. I have 2 Generators and want to set up one in the Pump House so I can have water whenever we have a power outage. I am going to dis-connect the 14-2 from the...
Hey there,
I'm here to ask about receiving some careers advice. Last year I was studying Level 3 Electrical Installation and after completing and passing all my Theory and Practical exams and receiving all the diplomas from City & Guilds I've been stuck on what to do next. As a person who came...
Good morning all,
My first post on here! Be kind :)
I have had a customer come to me who has a care home for the elderly. I have not carried out the EICR but have been given the sheets. They have had an EICR carried out in December 2020, the EICR has failed on a couple of things one been...
Thanks for any help in advance. I have an external outlet box installed on brick. I'm trying to figure out the best way to run a 2 gang box straight-up from the existing box. This is what it looks like. Which conduit is necessary and what type of connection do I need? Looking to connect to this...
Hi all (new here),
I recently had a boiler service and they mentioned that the wiring looks wrong. Boiler otherwise in good condition. I've seen similar threads and not sure my case matches so here goes. Previous owner installation so not sure who did the job.
System setup:
Myson controller...
Hello guys.
I need to install a Tesla charger 3 gen for Tesla Y. My Client has 1 phase installation. I will install CU with SPD and PME fault detector. Could you please tell me what size of cable I should use for this charger point?
Thanks for any advice.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.