I recently had my 50yr old 100A main panel replaced with a 200A Siemens panel (MC2040B1200EFC). It is the incarnation with the 200A main breaker at the bottom (earlier versions were center fed which would have alleviated my problem). At the same time I had the electrician add a 50A inlet for a...
I live in Malaysia and this happened to the office i'm working at.
There's a MCB that controls the light in room A and the stairwell.
Either the MCB or the ELCB will trip randomly even though no one is playing with the switches.
I tried to troubleshoot it myself. So far the situation is
1. The...
Hi All,
I am having fibre to the premises fitted tomorrow, much earlier than expected, supposed to be another month or so.
I looking for some advice on what to get to replace the current 1x4 sockets with 3 extension leads for pc, tv and always on. I am not looking doing the work myself, just...
I've been asked to fit a Growatt spf 5000 es inverter which will have batteries (not sure what yet) and tied to the 230v domestic mains supply. Although I'm qualified to fit pv systems, I've never actually fitted any battery systems so not sure how they work in relation to connecting to the...
Hi all,
I am a new home owner and have had a quote on some electrical work I wanted done in my home. I was wondering on if someone could give some advice on if the estimate I have been given is over priced:
Estimate for the following electrical work -
• Full electrical installation condition...
The buyer of my house has had an EICR done. I have anonymized and attached. Also the associated quote for remediation.
I am wondering:
surely the smoke detectors are nothing to do with it (plus, this is not a rental property anyway)
it's not clear to me why the CU has to be replaced
a lot of...
Im an apprentice spark and have been sent to look at some bonding work at a restaurant as apparently staff have occasionally been getting shocks when they touch across metal counters. The bonding has been cut in some parts but when i trace it back rather then going to the 3 phase board it has...
Hi all, new to posting but been reading for years.
I inherited a house from my grandmother who passed in 2021, I intend to renovate and rent out, step by step, job by job as money allows.
Getting the property ready to rent has uncovered a fair few jobs needed to bring it out of the 1970's
I...
hi there can anybody help ive brought a house in spain and need a bolletin to say the electrics are ok the fact is there not if i remove the 2 ctts that are there can i get it done on the main feed and a empty db then add a temp feed in order to do the work any advice would help
I’ve heard the C&G 2919 EV installation course is being discontinued in favour of a new NVQ in Sept 2022.
Has anyone else heard this?
I’ve done my C&G 2365 level 2, do you think I’d be able to pass the 2919 now to get it done before it swaps to an NVQ? Or should I really complete level 3 first?
Hi everyone, just learning a bit more about writing up EICRs. I have a situation where I have a 3 phase board with a sub main going to a small office which has a consumer unit in it. The sub main board is supplied by and MCb in the 3 phase board obviously making it into a single phase board in...
Iam moving into a new flat and there is an ENER-G Switch 2 box on the passage wall,what
is this for ?,i have done a bit of searching around online and it seems to have something to do
with the heating,it has a sticker on it that says "Locked" so Iam assuming it is switched off,
the electricity...
Hello folks
I'm just looking for some advise regarding career route path.
I'm 53, been a sparky all my life.
I have a Maintenance gold card, 18th regs and 2391 52 amongst other add on qualifications.
I'm currently in a fairly well paid role as a full-time electrical test engineer in the...
I posted yesterday and then thought I had it figured so I edited post and thankfully, a moderator then deleted it. I apologize for making work for the moderators but now I have everything in order and I do have a question about running the ground from an attic fan.
The attic fan (Powercool Plus...
Hi Guys,
Wondering if someone can advise me if i can do the following. I just want the wiring to be neat and tidy and not have so many outside, also happy to hear your recommendations of course!
RCD FCU to Outdoor Double Socket using 2.5mm >
From Outdoor Socket to another FCU with 3amp fuse...
Hello, I'm looking for advice from you guys who know the trade from inside out, I'm 24 years of age and just finished my Level 2 for electrical installations and also have done my 18th edition and building regs will be progressing onto Level 3 now.
The course I did was a 6-weekend course which I...
Doing major renovation in our house and looking to tidy up phone line positioning etc. I've removed the old cupboard surrounding the CU and PV panel components, with a view to rebuilding a nicer cupboard housing modem and router.
I want to spur of the existing ring, however thanks to the pee...
Hey all, looking for a bit of industrial electrical advice, I'm kind of stuck between a rock and a hard place at the moment, the company I work for are pressuring me to work on HV (11KV) against my will.
They put me through a 4 day AP (approved person HV) course and as I was the only person who...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.