terminal block

Recent contents Top users
  1. C

    Can you help me install a fixture using a screw terminal block?

    I have never installed a fixture that uses a screw terminal block before and could use some guidance. Since the earth wire is connected to I screw the grounding wire in the same terminal and then connect the blue wire to the white and the brown to the black?
  2. F

    Connecting 2 cables together

    Hi. I have had to cut a cable in order to feed it through a wall. Then I plan to reattach it once through. At the moment I am using a standard terminal block however it looks messy as it's bulky and I have to use electrical tape. I was wondering if I could use one of these...
  3. M

    Wiring the terminal block on a Login oven

    I'm trying to wire up a new Logik oven and it has a non-standard terminal block, much smaller than that on the oven I just replaced and all the YouTube videos I could find. It looks like you just screw the electrical wires in directly. So, I guess I should remove the connectors and screw the...
  4. Mike Johnson

    Earth terminal block

    Does anyone know where I can get an earth terminal block like this in the UK: https://www.leroymerlin.fr/v3/p/produits/repartiteur-de-terre-p-40-mm-michaud-e1401450424
  5. E

    Wiring terminal block for induction hob

    Hello...I need to rewire a terminal block for zanussi induction hob zei6840fbv Can someone help please. ImGe attached
  6. M

    32A MCB feeding 1.5mm & 2.5mm T&E cables via 30A terminal block

    Quickie - Would you say this is ok? 32A MCB feeding 6mm T&E which is then connected to a 2.5mm T&E & 1.5mm T&E cable via a 30A terminal block in plastic terminal block housing buried in stud wall. The 2.5mm feeds a 3kW immersion heater with 13A SFU at the heater end. The 1.5mm feeds gas boiler...
  7. C

    Regulations on Terminal Block wrapped in electrical tape

    Hi, I'm a council tenant and just had some work done in my kitchen, which included a new electrical installation. There was previously a single sockets ring main, and a new kitchen sockets ring main was added, which in itself seems fine. But I'm concerned about the pre-existing ring main. This...
    • Camdonian
    • Thread
    • block electric electrical regs regulations tape terminal terminal block
    • Replies: 21
    • Forum: DIY Electrical Advice
  8. A

    Such a thing as a terminal block splitter?

    Amateur question here (and I may have picked the incorrect subforum too) I want to attach a single common ground to 12 separate buttons, with individual wires rather than daisy-chaining them. I'm wondering what the best tool for this would be. In my mind I have pictured a terminal block, but...
  9. M

    Terminal Block

    Hi All, I have just fit 10mm splash backs in my kitchen bringing the sockets out by the same distance. On one of the double sockets I now have barely enough cable to work with and connect to the socket, I have 3 lives, neutrals and earths. Is it ok to use a terminal block to connect all like...
  10. B

    Paramount shutter door motor wiring / terminal block - single phase

    Hello, Would anybody be kind enough to point me in the right direction on how I would energise this roller shutter door motor to go one way or the other so I can start to design a control? Thank you in advance for your help.
    • beefburger
    • Thread
    • block door motor phase shutter single single phase terminal terminal block wiring
    • Replies: 2
    • Forum: UK Electrical Forum
  11. L

    Stupid question swa to flex via terminal block

    Stupid question but can you connect swa to flex cable via a 15/5amp terminal block in a waterproof terminal box? Tom
    • Londonsparky
    • Thread
    • aus block flex question stupid swa terminal terminal block
    • Replies: 5
    • Forum: Australia
  12. R

    MEM Memshield 1 Terminal Block?

    Hi chaps, Does anyone know if there is a terminal block suitable to fit into a MEM memshield 1 series DB? It will be fused downstream, its just that there isnt physically enough room to fit a 40A Fuse holder in the board. Either a description, web address, model number, or datasheet, or...
  13. P

    Star Terminal Block Arrangement

    Hi all, Query about Star Terminal Block Arrangements. On our notes online, it says “the start ends of each winding (aren't these U1, V1 and W1) must be connected together to form the star point and the finish ends connected to the 3-phase supply.” Should it not be the other way round, i.e. the...
    • pprendeville
    • Thread
    • arrangement block canada terminal terminal block
    • Replies: 16
    • Forum: Canada

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Tiling Blog
Tile Blog
DIY Forum
Tiling Advice
Tilers' Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock