How's this for a means of earthing this steel conduit is acting as a tt arrangement, although brilliant ze readings, 6.41 ohms 34a. What do you all think to this.
Hi All
Wanted to get feedback on this idea.
I have 3 fuse boards which trip frequently whenever there is a lightening storm nearby. My electrician friend has suggested he swaps all the MCB's with RCBO's so that individual circuits trip rather than the whole board. Each board currently has a...
11kv/440-750kva 3 phase tx on 200A primary fuses, spotted this at work, whats the max current per phase you can draw on the secondary without rupturing the fuses.
Hi All
I was called out to a house today who's meter had been removed by the electricity board as they had been tampering with it.
They wanted to connect a generator to it and no longer use any of the suppliers.
As there will be no switching between supplys, I presume I no longer need to...
I've previously asked this in the Course feedback section of the forum, but due to a lack of response I thought I'd appeal to the masses!
I've been looking at various "hands on courses " for Industrial ie controls , as upto now I've not had much contact with this type of work, I've done plenty...
Guys, looking for a bit of help with a Generator.
My old man has some land with a small workshop in the middle of nowhere. He's bought a generator previously used as backup for a vets. I'm putting it at about 20-25 years old, it's lister petter and thats as far as i've got with it. Apparently...
Hi all.
First time on the forum, but have enjoyed reading many ofthe threads, thanks. I am looking for some advice on a fault from a TT systemand would greatly appreciate any input.
History, my wife and I are volunteering in Africa for a fewyears. The charity I am helping does not have an...
Hi All,
I am currently tendering for a new build office block which is to be a modular wiring plug and play installation on all the floor plate areas, I currently use EES data for estimating and we find that their unit hours are acceptable for sockets,conduit etc however there are no products...
Hi has anyone ever used these before and the software? We usually use allen bradley micrologix or control logix, but for a small job I am doing I have been told to use these, it is for a forge I am building a 400amp inverter panel for a large motor turning a big crank, all the zelio is needed...
How fair is agency work? This is a genuine question.
I started work for an agency. Its the first time I have done this. I dont get paid by the agency, but by a some organisation that calls itself my employer. So the electrical contractor pays the employment agency and the employment agency...
Hi guys, I'll give you a brief run down of the system before I go into the problem. At the hospital where I work we have two back up generators. They're rated at 750KvA. In the event of mains failure, they both start up same time, one generator will then connect to the main busbars, then roughly...
I’m currently doing a job where I have to replace 20 MCB’s with RCBO’s in the main consumer unit of a public building. I was told by another colleague, that you only had to trip test one RCBO and to use this figure for the remaining 19?
Surely this isn’t right, and you have to test the...
Stone built (140 ish years old) end of terrace house with an old two wire onto ceramic doughnuts overhead supply. The DNO inspector came out to look at it and they're replacing everything from the head to the pole FOC.
What caused such a remarkable event? I'm sure we all know how they like to...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.