A
AndyTheSpark
Hi All
I was re-testing a brand new install for QC purposes todayand the N-E on the IR was 0 Megohms, am I right in expected the RCD to trip. Itwas a TN-C-S system so wondered if the shared neutral and earth may have aneffect?
The IR for L-N and L-E belled out perfectly, I haddisconnected both the neutral and earth from the board to avoid anyinterference. There was nothing plugged in or spurred, but I wouldn’t expectthat to matter anyway on N-E. The only thing I didn’t do was put a load on thecircuit – would this make any difference?
Can anyone shed any light?!?! Thanks, Andy.
I was re-testing a brand new install for QC purposes todayand the N-E on the IR was 0 Megohms, am I right in expected the RCD to trip. Itwas a TN-C-S system so wondered if the shared neutral and earth may have aneffect?
The IR for L-N and L-E belled out perfectly, I haddisconnected both the neutral and earth from the board to avoid anyinterference. There was nothing plugged in or spurred, but I wouldn’t expectthat to matter anyway on N-E. The only thing I didn’t do was put a load on thecircuit – would this make any difference?
Can anyone shed any light?!?! Thanks, Andy.