R
Robo
House has 17th ed board. Bonding in place. Do i need to bond the bath. What testing would you recommend
Discuss Bonding to a copper bath in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Reply to Bonding to a copper bath in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Similar Threads
Not sure on this one.
Mains water is coming up from the ground in lead pipe in bathroom. 2 inches of copper pipe before the stop tap. All...
Good afternoon,
I wanted to heat up a .5" copper tube that is approximately 15cm long up to about 250 C. I would like to use nichrome to do...
Curious about supplementary bonding, I have these two 4mm Cables loose and not connected to anything in my parents house. I presume they are for...
Hi all,
I would like some advice on a scenario currently at my workplace. I am replacing a Sub main DB and replacing the wiring to sockets/lights...
Hi, I am after some advice please. I am a bathroom fitter and are in the process of installing a jacuzzi bath. All plumbed in and ready to test...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Is it possible to put a 16mm swa on a 40a mcb protected by an rcd
- Latest: brianmoooore
-
-
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.