R
Robo
House has 17th ed board. Bonding in place. Do i need to bond the bath. What testing would you recommend
Discuss Bonding to a copper bath in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Reply to Bonding to a copper bath in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Similar Threads
In my bathroom there is supplementary bonding of the bath, bath pipework, and basin pipework before it goes into trunking and exits unconnected in...
Greetings, I am homeowner and looking to confirm if I will need earth boding to water pipes.
There is already earth boding near Gas meter and the...
Not sure on this one.
Mains water is coming up from the ground in lead pipe in bathroom. 2 inches of copper pipe before the stop tap. All...
Hello. New member here. Electrical enthusiast.
I am at a friend's house in the Bahamas and decided to look at the load center in the house, which...
If you were to test a metal staircase on the side of the house on insulation resistance and it gave you a dead short. Would that need bonding...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.