Discuss Cordless drill - Dewalt vs Milwaukee in the Electrical Tools and Products area at ElectriciansForums.net
Imo there's a limit on how much torque you actually need though. It's like people who pull their wires over X BHP in a car or bragging theirs can do 168mph when you can't even go that speed.Seems Iike those 2 are very similar in their target market anyhow ,base pro level
The Milwaukee combi above twice the torque and probably way better build quality for twice the price
Well that's right and the impacts can do the tougher work anywayImo there's a limit on how much torque you actually need though. It's like people who pull their wires over X BHP in a car or bragging theirs can do 168mph when you can't even go that speed.
For almost any job on site, the torque is going to be just fine on any pro model of combi. Most of us have an SDS for anything bigger anyway.
I'll give it its due the Makita impact driver was half decent but still relying on a crap battery.Well that's right and the impacts can do the tougher work anyway
Because specs and figures aren't relevant if the batteries don't hold charge and the chucks come loose etc.
What i'm looking for in a tool is that they're reliable so i can actually count on them to work when i need them. No good having 'wrist shattering torque' if the batteries start to die after a dozen cycles or the chucks are coming loose and need replacing. You could argue this is a battery problem but imo a tool is only as good as its battery since without them they are ornaments.
I had the Makita cordless and impact driver, and the circular saw and they were rubbish and real, real expensive. My opinion is based on their top of the range stuff. It's rubbish.
What warranty are they all offering ,.Bosch has 3
Rang them one day with a trigger problem, they sent a courier out to collect next day and he dropped it back again,zero work on my part
I ignored your point because it was stupid.You had a bad experience and that's unfortunate, but you've completely ignored every point I made.
For almost any job on site, the torque is going to be just fine on any pro model of combi. Most of us have an SDS for anything bigger anyway.
I ignored your point because it was stupid.
When drills fall to absolute bits because they're crap i don't care that it's got better specs on paper, it's still a piece of crap and i won't ever buy them again, which is what happened with Makita. I don't remember the numbers since i sold the lot to someone else but they were the most expensive drills Makita make, which is a point you ignored because it didn't suit your argument. Almost £400 for the pair + 2 batteries and a charger, their top of the range stuff. And it was gash.
I rate my trust in brands based on how that brands manufacturing holds up to scrutiny with daily use. If i buy even a couple of bottom of the range 'professional' tools and they fall to bits then i don't care that their 18v XYZ version has better gearing or more torque, i won't buy their brand again because they are known to me to use crap materials and have rubbish build quality. But you do you.
Makita are rubbish. It doesn't matter whether one of their specific drills is good or not, based on owning several of their products i'm saying that they're garbage and i won't buy them. That's the price companies pay for making shoddy products, which Makita's are in my experience.
I ignored your point because it was stupid.
When drills fall to absolute bits because they're crap i don't care that it's got better specs on paper, it's still a piece of crap and i won't ever buy them again, which is what happened with Makita. I don't remember the numbers since i sold the lot to someone else but they were the most expensive drills Makita make, which is a point you ignored because it didn't suit your argument. Almost £400 for the pair + 2 batteries and a charger, their top of the range stuff. And it was gash.
I rate my trust in brands based on how that brands manufacturing holds up to scrutiny with daily use. If i buy even a couple of bottom of the range 'professional' tools and they fall to bits then i don't care that their 18v XYZ version has better gearing or more torque, i won't buy their brand again because they are known to me to use crap materials and have rubbish build quality. But you do you.
Makita are rubbish. It doesn't matter whether one of their specific drills is good or not, based on owning several of their products i'm saying that they're garbage and i won't buy them. That's the price companies pay for making shoddy products, which Makita's are in my experience.
Reply to Cordless drill - Dewalt vs Milwaukee in the Electrical Tools and Products area at ElectriciansForums.net
Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.
We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.