deemed works not acceptable

[Dillb]

It is if the spur is wired in 4mm.

Surely that depends on the OCPD, Volt drop, Zs is satisfactory etc

 

[Nigel]

Surely that depends on the OCPD, Volt drop, Zs is satisfactory etc

Some things are so obvious they are a given. It is not my fault if you are unable to keep up.

Please don’t take this the wrong way but you will probably benefit a lot from the trainee section. If you PM a Mod they can give you access.

 

[happysteve]

It is if the spur is wired in 4mm.

Are you talking about an inverse lollipop circuit?

I wouldn't.

 

[MDJ]

Fight Fight Fight lol

 

[Wilko]

If I recall correctly, spurs are limited to 20A max so the junction to the ring can't be "point overloaded". So 1 outlet or multiple after a fuse unit.

 

[telectrix]

Fight Fight Fight lol

i'll call your lollipop and raise you a candyfloss.

 

[happysteve]

i'll call your lollipop and raise you a candyfloss.

I reckon the next thing up would be a kebab?

So: "standard" lollipop circuit (6mm from the OCPD to a joint box, then standard RFC in 2.5mm), with one of Essex's 4mm spurs off that.

 

[Spoon]

I can feel the love and joy overflowing in this thread..

 

[happysteve]

Lollipop:
OCPD ----O

Inverse lollipop:
OCPD O----

Kebab:
OCPD ----O----

Maybe we can just carry on...?

????
OCPD ----O----O---- ...

 

[MDJ]

Dillb and Essex have been at each other all week lol, there just has to be a fight chuckle, I think they should start an insult thread in the arms and go for each other at our complete pleasure pmsl lol.