Discuss DIY - Install Cat6 through rigid insulation glued to Drywall in the UK Electrical Forum area at ElectriciansForums.net

Can’t believe you still use inches over there!

We have 12.5mm and 15mm. Also 9.5mm, but this is only generally found in slightly older properties on the ceiling in my experience. Walls will nearly always be 12.5mm if they have plasterboard in their construction.
 
Can’t believe you still use inches over there!

We have 12.5mm and 15mm. Also 9.5mm, but this is only generally found in slightly older properties on the ceiling in my experience. Walls will nearly always be 12.5mm if they have plasterboard in their construction.
Matt 1/2 is equivalent to 12.5mm so I know the metric system
 
Dvymac welcome to the forum and since you have to cut into the wall to install your box and if you have an attic you could fish the wire down through the wall to each box. Not sure if you have an attic. How thick is the drywall, ours is either 5/8 or 1/2 thick

ATM I'm just looking at adding drops in the upstairs of a bungalow. So I have access to eaves (attic), in the walls around each room. I've got space to walk/crawl the cable arround. I've got the pull sticks in case i try drop it to the ground floor later.

Drywall is like 1/2 inch, but the rigid insulation glued directly onto the reverse is like 4.5, or 5 inches thick inspots on top of the drywall.
 
ATM I'm just looking at adding drops in the upstairs of a bungalow. So I have access to eaves (attic), in the walls around each room. I've got space to walk/crawl the cable arround. I've got the pull sticks in case i try drop it to the ground floor later.

Drywall is like 1/2 inch, but the rigid insulation glued directly onto the reverse is like 4.5, or 5 inches thick inspots on top of the drywall.
It can be done and good deal on having the sticks they can be very helpful. Good luck
 
If the insulated plasterboard is fixed onto battens you’ll probably do it easily. If it’s ‘dot and dabbed’ with adhesive then it’s probably not possible without damage to the walls.
 

Reply to DIY - Install Cat6 through rigid insulation glued to Drywall in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

S
Hi, I am involved with wiring a conversion. The building is a old stone barn. A timber frame has been built internally. Rigid Kingspan foiled...
Replies
5
Views
7K
R
Anyone had any experience with Bellrock Plaster Partitions ? Seemed to be popular with John Lawrence (Glasgow) builders in the mid-late 1950s but...
Replies
5
Views
11K
rsmck
R

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock