Fused spurs in kitchen

[ngoodson1969]

Hi all,

Is it good practice in a new kitchen install to have fused spurs for each appliance, (washing machine, fridge, dishwasher)? If so, would they be 13A fuses? Thanks.

Nick

 

[ezzzekiel]

usually to provide an isolation point for intergrated appliances and dont think a washing machine would be too happy with a 3amp fuse do you?

 

[Bright Sparks]

Yes it is general practice to have each appliance on an individual fused 13A Spur (on some to have a normal switch above the work surface to turn on and off).

This allows isolation to replace / repair units with out disruption to the rest of the kitchen. I would usually make them accessable also as some I have seen were almost useless as they couldn't be turned off in the event of an emergency.

 

[Mac]

Yes it is general practice to have each appliance on an individual fused 13A Spur (on some to have a normal switch above the work surface to turn on and off).

This allows isolation to replace / repair units with out disruption to the rest of the kitchen. I would usually make them accessable also as some I have seen were almost useless as they couldn't be turned off in the event of an emergency.

Don't you mean Double Pole switches instead of normal switches

 

[Bright Sparks]

No normal switch, sorry the isolation is present via the 'Switched fused spur' not a normal unswitched fused one. I know this is an expensive way to do it but was all the rage in Kensington & Chelsea (Central London) where I was doing most of my instal work and they had the money to pay for it.

Thanks for pointing it out

 

[Mac]

No normal switch, sorry the isolation is present via the 'Switched fused spur' not a normal unswitched fused one. I know this is an expensive way to do it but was all the rage in Kensington & Chelsea (Central London) where I was doing most of my instal work and they had the money to pay for it.

Thanks for pointing it out

Know what you mean now.Never used them myself

 

[ngoodson1969]

Thanks all.

Nick

So would it be better to use 'switched' fused spurs or not?

Nick

 

[Mac]

Thanks all.

Nick

So would it be better to use 'switched' fused spurs or not?

Nick

Yes that would be fine mate

 

[WayneL]

I might be being daft here (I am still learning) but why do they have to

be fused spurs??

Surely the 13 A fuse in the washing machine plug top is sufficient.

And where would the discrimination be if you had a 13 A in line fuse

as well as the 13 A plug top.

Just a thought - I might be wrong

Unless, of course, integrated appliances are wired direct (i.e. no

plug) then I could see the point - I haven't fitted many kitchens

 

[Spudnik]

Technically, an isolator above the worktop for freestanding appliance isnt really needed.

BUT, it is advisable as appliances can be heavy and if they need to be isolated then the switch should be accessible.

Could always put a socket in an adjacent cupboard.