Search for tools and product advice,

Discuss Heights Cu regulation ? in the UK Electrical Forum area at ElectriciansForums.net

stidge

-
Arms
Reaction score
50
I’ve mounted a Cu at eye level in tall cupboard unit, easy to see and reset if necessary.cruella da ville( customer ) now wants it moving 500mm up ! She’s a pain in the arse and has been all through the job ) is there a regulation I can hit her with regarding height and accessibility, I know there was something that was issued in the 15th ? Or part m of building regs ? Just so I can leave where is it make her pay to move it ! Thanks
 
I’ve mounted a Cu at eye level in tall cupboard unit, easy to see and reset if necessary.cruella da ville( customer ) now wants it moving 500mm up ! She’s a pain in the arse and has been all through the job ) is there a regulation I can hit her with regarding height and accessibility, I know there was something that was issued in the 15th ? Or part m of building regs ? Just so I can leave where is it make her pay to move it ! Thanks
I’ve mounted a Cu at eye level in tall cupboard unit, easy to see and reset if necessary.cruella da ville( customer ) now wants it moving 500mm up ! She’s a pain in the arse and has been all through the job ) is there a regulation I can hit her with regarding height and accessibility, I know there was something that was issued in the 15th ? Or part m of building regs ? Just so I can leave where is it make her pay to move it ! Thanks
You ought to know this between 1350 and 1450 above ffl
https://www.tlc-direct.co.uk/Technical/DataSheets/Hager/Hager_17.pdf
 
Sure he meant rewires thanks lads , I’ll print of documents and tell her I’ve put it higher than it should be anyway , it’s approx 1.7m affl
 
As it's not a new build then the work carried out must no more unsatisfactory in relationship to the requirements than before the work was started.....Basically if it was at the height the customer now wants it before then there's is no reason not to put it back at that height other than personal preference.
 
If she's nasty to dogs then its luck that any lights work to see where the CU is ... I didn't really say that did I? That was just a thought really, I didn't write it down or anything :rolleyes:
 
I know the OP asked for required regulations and I gave it to him, the regulation I mean.
 

Reply to Heights Cu regulation ? in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

  • Article
Electrical2Go - Choosing the Right Cooling Fans - All You Need to Know We understand that choosing the right cooling fan can be overwhelming...
Replies
2
Views
165
  • Locked
  • Sticky
Beware a little long. I served an electrical apprenticeship a long time ago, then went back to full time education immediately moving away from...
Replies
55
Views
5K
Hi all. I am not an electrician but greatly really appreciate some advice if possible. I am in the process of getting a full house rewire and the...
Replies
36
Views
13K
Hi all, wondering if someone can clarify this or refer me to a regulation regarding using connector block inside a Consumer Unit, I have some...
Replies
11
Views
6K
Morning, I’ve got a customer who really wants to have two wall lights mounted on their garage wall, easy peasy. She wants to switch the lights on...
Replies
1
Views
878

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock