W
whazza22
Can anyone recommend a decent holesaw set for cutting plasterboard, wood and occasional metal?
Thanks
Thanks
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss Holesaw Set? in the Electrical Tools and Products area at ElectriciansForums.net
Share this page
OP
Mark_Burgess
This bosch one very good Bosch Holesaw set, cuts metal with ease and has many other sizes also.
One that I would recommend
One that I would recommend
Last edited by a moderator:
OP
whazza22
What about this one? Only be used a few times.
Toolstation > Power Tool Accessories > Holesaws > Down Light Holesaw Kit
Toolstation > Power Tool Accessories > Holesaws > Down Light Holesaw Kit
OP
TPES
This bosch one very good Bosch Holesaw set, cuts metal with ease and has many other sizes also.
One that I would recommend
I agree, I have the Bosch set, it's excellent.
OP
eskimo39
I bought starrett and they are excellent. I didn't buy a kit as I only use a certain sizes so wouldn't benefit from a few of the smaller sizes. I only seem to use 20mm, 25mm, 64mm & 73mm the 64mm are usually for downlights and the 73mm for tilt downlights.
Have a 20mm which is over 10 years old and used lots but still seems as good as my new ones.
Have a 20mm which is over 10 years old and used lots but still seems as good as my new ones.
OP
AndrewMgan1976
seconded
OP
shaun c
This bosch one very good Bosch Holesaw set, cuts metal with ease and has many other sizes also.
One that I would recommend
am with you there
OP
pmac10
definitely agree, last ages and mine are used on stainless steel exclusively.
OP
hopkins85
You need this bad boy. Adjustable Hole Cutter with Cowl - NoLinkingToThis, Where the Trade Buys
OP
whazza22
OP
hopkins85
Great if you like the Casper the Ghost look.
OP
whazza22
Can you get the dust shields for them?
Reply to Holesaw Set? in the Electrical Tools and Products area at ElectriciansForums.net
Share this page
Similar Threads
Where can I get a holesaw for lathe and plaster jobs
Are any of these holesaw sets any good:
https://www.kleintools.com/catalog/hole-saws-and-accessories/hole-saw-kits
hey guys / girls,
Whats the best way to enlarge a round hole in overhead metal panelling ?
Unfortunately i cant find a holesaw the correct size ...
Hey guys
I'm after a decent priced multifunctional tester . I know a few be knocking about on ebay. Can anyone name a couple that I could...
Hi All, I've bought a 12ft Catering Trailer that is mainly fitted with LPG Equipment, but Electrics are required for 1x Undercounter Fridge, 1x...
Electricians Tools | Electrical Tools and Products
Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.
We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
ELCB or RCD for instant tankless shower water heaters?I would say an external RCD is better as it protects the cable as well, so insulation damage to...
- Latest: pc1966
-
UK Looking for adviceWelcome to the forum! That is a pretty vague request, it would help if you could be a bit more...
- Latest: pc1966
-
Fuel Gauge needle moving with revs issueCheck the dc voltage at the rectifier. Has there been any alterations to the wiring etc. Is...- Latest: mainline
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.