honeywell 8ep3p6a help thanks.

[jaosn]

1st post super site. thanks for any one who can help with the 3 question on this x panel ( nightmare im having )



hello i got the honeywell 8ep36a there was a post last year i tryed before posting here of mod Tazz .

over the spanner double lock think .

i press p 9999 pressed number 2 set alarm of .
try again power and green lock and padded lock stays on .

led lit on panel are power/ lock and spanner green


------------------------------------------------------------------------

2nd user can i change what is the code de.key ?? 0123?? (( unsure of the temp code if there was/or is 1 set in backup ))


-----------

last have set door to ding dong = but the red led stays on puzzled why press x clears unsure if i done somethink .


----------------



ps the manual is hard to under so in steps if possible thanks all .

 

[tazz]

Is this an Accenta panel..?, the 9999 code is for programming only...0123 is the default user code. red spanner led indicates tamper fault, either bell box cover or control panel cover on fitted.

 

[jaosn]

i tryed again .
p = 1-8 red . then 9999 then sos .

the panel and bell-box have not been open seal on both .


any code or how do clear?? thanks for the reply .

 

[tazz]

Why are you entering 9999 as a code?

 

[jaosn]

so i use my code example..
p 2468 then xx xx ?? to reset the tamper spanner . sorry for been a pain .

friend as check box the sealer is still on screw on bell + box no on as removed it .


thanks for updating