- Reaction score
- 4,365
Sounds like a job for Stuart Little, he could make a fortune.
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
- Thread starter Welsh_sparky_21
- Start date
Discuss Lath and plaster ceilings in the UK Electrical Forum area at ElectriciansForums.net
Share this page
- Reaction score
- 17,094
That’s my cousins name, coincidently.
He went to a wedding once where he was introduced to an actual Harry Potter
- Reaction score
- 67,273
£30 for that??? ping pong ball do job for next to nowt.
- Reaction score
- 6,864
Also only compatible with Super Rod threading.
- Reaction score
- 4,241
Which also means compatible with HellermanTyton.
- Reaction score
- 2,812
Interesting, I didn't know that. The HellermanTyton whisk seems to be half the price of the Superrod one, and they even look identical.
Must check if that is the case for other attachments, which I always think can be a bit pricey whenever I have to replace one.
Reply to Lath and plaster ceilings in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
Where can I get a holesaw for lathe and plaster jobs
- Question
Hi All.
I need to extend the cables for a 3 plate ceiling rose/pendant on ground floor ceiling by 450mm. Can I fix the ceiling rose/pendant to...
Hi There
Just a quick one, I'm wondering what's everyone's thoughts on this are.
A subby has clipped a cable to a plaster board ceiling using 3m...
I'm installing smart modules in my light switches which means I need to replace the existing 25mm back boxes with 47mm ones. Downstairs all walls...
I have 16 ceiling spots to be replaced in a room being repurposed as a bathroom. Some will be over a shower, basin and bath hence need to be IP65...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Fuel Gauge needle moving with revs issueThe diagram you posted for the non battery model has 4 pins, there are only 2 wires to the...
- Latest: plugsandsparks
-
-
can i book appointmentwell this will make you chuckle,this morning sent a customer an email regarding some work they...- Latest: buzzlightyear
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.