Spotlights help

[jamesBoater]

No, just loop in and out of each light, if you use MF junction box then accessibility is not an issue anyway.

 

[Raj B]

Ok thanks pal

 

[jamesBoater]

Also if your unsure about how to wire it then just draw it out. I find this helps. as said it would work with FT&E or Singles Etc.

 

[Raj B]

Ok thanks mate. Another thing, I know if a one spotlight burns out frequently than the others could that mean the live and neutral are wired the wrong way round?

 

[Octopus]

Why don't you ask your boss/mentor?

 

[Raj B]

My boss is hardly ever on site and my mentor is a cowboy

 

[driverman]

Ok I understand all of above. When fitting all these LED / halogen lights etc. How/ who works out how many are required to light up a room? I'm an old electrician who used to fit just one fluorescent in a kitchen! lol

 

[shagbite]

My boss is hardly ever on site and my mentor is a cowboy

haha. cowboys and indians on a sunday afternoon - a time honoured tradition in our house.

 

[Octopus]

Ok I understand all of above. When fitting all these LED / halogen lights etc. How/ who works out how many are required to light up a room? I'm an old electrician who used to fit just one fluorescent in a kitchen! lol

Hum, a good question, I normally make a suggestion but there are too many variables. Typically not more than about 1m apart!