The right driver for M3.5 backbox screws

[Eddiesparks]

Sounds basic but i had the PERFECT 1000v screwdriver for back box screws. The bloody chippy at work borrowed it and i never got it back. He's a tool(!) about stuff like this (basic respect) so that's another subject but i need to get a replacement and havent been able to find one. I have a nice 0.75x4 but I feel like i need a wider 0.75x6. Anyone got any insight on this? Thanks a lot!

Ed

 

[Elmer BeFuddled]

Sounds basic but i had the PERFECT 1000v screwdriver for back box screws. The bloody chippy at work borrowed it and i never got it back. He's a tool(!) about stuff like this (basic respect) so that's another subject but i need to get a replacement and havent been able to find one. I have a nice 0.75x4 but I feel like i need a wider 0.75x6. Anyone got any insight on this? Thanks a lot!

Ed

Borrow his nice, expensive 2" wood chisel and grind it down!

 

[Eddiesparks]

Ha ha do a bit of chasing with it!

 

[pinty]

wiha do 4.5mm and 5mm tip drivers.....the first is excellent for plate screws and socket terminals..and they do em in long n short versions....diff tip thicknesses....go on there...knock yourself out

 

[wade88]

finger nails....... alternatively, i really like my Irazola drivers. Long shafts so good torque, nice grips and life time warranted. Perfect

Bahco VDE 1000v Screwdriver Set 7pc (Formerly Irazola) on eBay!

Bahco (Formerly Irazola) 7 Pc 1000V VDE Phillips (Ph) / Slot Screwdriver Set 600 on eBay!

Bahco now apparently

 

[rmc86uk]

I have two seven piece Irazola sets and I hate them! Only got them because they were something like £24! I used to love CK but don't like the newer shaped handles!

 

[GLENNSPARK]

I have two seven piece Irazola sets and I hate them! Only got them because they were something like £24! I used to love CK but don't like the newer shaped handles!

the CK dextros were good....as you i liked the handles on them....not keen on the new ones...

 

[Robert Turnbull]

What's not to like about irazolas ??

 

[shanky887614]

wiha do 4.5mm and 5mm tip drivers.....the first is excellent for plate screws and socket terminals..and they do em in long n short versions....diff tip thicknesses....go on there...knock yourself out

i use two drivers daily

wera 2.5 and bahco 3.5 driver for socket fronts etc

(im guessing its 3.5 the writing has long since worn off and havent paid too much attention to it for a while)

 

[Eddiesparks]

I'm confused!! 4mm x 0.75 is what i already have but the driver i had (and got lost) was a thin blade so did m3.5 and socket terminals but also around 5mm wide so great torque and no slippage. Esp for the m3.5s

 

[DNS1]

The bloody chippy at work borrowed it and i never got it back.

Did he "borrow" it with or without permission?!

If the former, you're an idiot (no offence ) and hope you've learnt from your mistake!

If the latter, you need a lock on your tool box!