-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss Tv and aerial question in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Not sure what you are trying to link to but the female coupler will go into the wall socket and the male to male lead will then connect the coupler in the wall socket to the TV
Oh no I think I might have ordered the wrong aerial then because I want the aerial to go into the back of the tv then into the FM, SAT, TV coaxial outlet tv Aerial connector.
Could you let me know if I need the aerial suggested by UNG or the one, I ordered as I may be able to cancel it, thank you.
Could you let me know if I need the aerial suggested by UNG or the one, I ordered as I may be able to cancel it, thank you.
The first photo is of the coaxial tv outlet and then the second photos are of the back of the tv. I want to connect the aerial to the Ant 1 aerial part on the tv.
Any advice would be great as the aerial I have at present which comes down from the ceiling connects to Ant 2 on TV but picks up no signal at all.
Which aerial would I need to connect from the coaxial outlet and then into the TV ANT 1 outlet thank you.
Any advice would be great as the aerial I have at present which comes down from the ceiling connects to Ant 2 on TV but picks up no signal at all.
Which aerial would I need to connect from the coaxial outlet and then into the TV ANT 1 outlet thank you.
Attachments
The lead you have ordered will fit as it comes with a female coupler to adapt it to fit the TV outlet
Thank you so much, once the aerial arrives, I will update you on the progress and fingers crossed it works because I have never used the 4-outlet coaxial but am assuming it works as the cable runs out of the flat and I don't think it would be cut off.
Any wish me luck and thank you all again
Any wish me luck and thank you all again
Reply to Tv and aerial question in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
I have a known working TV and went to set it up in another building for an old chap. He has about 3 TV's already. I connected the TV to 2 seperate...
A friend's partner has an interesting fault, if it is a fault.
She sets the shut down timer on the cooker and when the timer goes off (which in...
Hello,
I'm swapping my extractor fan in the UK and I have bought a Turkish extractor fan stupidly and the connections you can see in the picture...
On eBay you can find hundreds of Samsung (but also LG, Philips, etc.) Smart TV motherboards (see e.g. here Samsung UN65JU6700FXZA Main Board...
Hi all
I’m after a bit of advice regarding wifi/secondary router.
Data is not a strong point of mine so any advice would be very much...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
La Rocca coffer machine helpA friend of mine got a 2nd hand coffee machine (OK, probably 3rd or 4th...) for use in a charity...
- Latest: pc1966
-
Fitting bolt in fittingHi all I have an outdoor wall light which is bolted from behind. Then a decorative nut threaded...
- Latest: Improver
-
32 amp 3 phase socket, 300ma RCDPersonally I would write a formal risk assessment , it has to be by or with the involvement of a...
- Latest: Julie.
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.