Twin&earth and SWA installed loose on floor

[Wilko]

Putting an isolator (and its screw connections) into an inaccessible void is not simply not ok. Oh Dear.

 

[telectrix]

Putting an isolator (and its screw connections) into an inaccessible void is not simply not ok. Oh Dear.

should be OK he can operate thew switch with a magnet

 

[StigOfTheDump]

The CU end of the SWA has been glanded - but with a stuffing gland:

Now I've received the pictures, I cannot identify what the 'allegedly SWA' cable really is - can anyone identify it from the image below?

 

[Wilko]

should be OK he can operate thew switch with a magnet

Or perhaps by telekinesis?

 

[Pete999]

To be honest that cable doesn't resemble SWA the picyures aren't that informative, however it looks a bodge job to me

 

[StigOfTheDump]

It doesn't look like SWA to me either. Can anyone identify it?

 

[Andy78]

It could be SWA, the white part being the bedding and I think there is a blurry bit of grey that could be armourings. Looks of a small size to get that bend in the bedding if it is SWA. And it is obviously not terminated properly if so

 

[telectrix]

looks like SWA as Andy says, with the bedding exposed, going to the isolator,and some stripped out inner from isolator to CCU. whatever it is, it's a complete abortion and needs ripping out.

 

[Pete999]

I think he will struggle for one of them, at best he might get a dubious minor works certificate....

Then if that' s all he gets, the kitchen company need to be taken to court for Malpractice.

 

[Octopus]

On the basis that the kitchen company will submit a final invoice just tell them to provide the electrical certificates with the invoice ...... Or it won't be paid

 

[StigOfTheDump]

Unfortunately, Magnet insist on 100% payment up-front, so there is no option for my brother to withhold payment pending a adequate resolution, certs etc.

 

[Pete999]

Unfortunately, Magnet insist on 100% payment up-front, so there is no option for my brother to withhold payment pending a adequate resolution, certs etc.

Yes like most of them

 

[solarsavings]

Might be 4 or 6mm xlpe.

 

[Octopus]

Unfortunately, Magnet insist on 100% payment up-front, so there is no option for my brother to withhold payment pending a adequate resolution, certs etc.

I would suggest he reminds magnet that he is expecting certificates on competition ....

 

[Pete999]

I would suggest he reminds magnet that he is expecting certificates on competition ....

Agree, keep on to the boogers, reckon you would have a better than evens chance of getting legal costs if you prosecuted them.

 

[Midwest]

It doesn't look like SWA to me either. Can anyone identify it?

Looks like NYY-J cable to me. A 3c 2.5 mm is 11.3mm, and 4mm is 13.1mm OD according to some links I've googled, with a 25A & 34A respectively.

 

[telectrix]

Looks like NYY-J cable to me. A 3c 2.5 mm is 11.3mm, and 4mm is 13.1mm OD according to some links I've googled, with a 25A & 34A respectively.

you need to get out more. .

 

[Midwest]

Its this heat. Has the Sun gone under the yardarm yet

 

[Midwest]

you need to get out more. .

PS I'm right though, ain't I

 

[StigOfTheDump]

Thank you Midwest. I agree, it looks like NYY-J cable, based on a quick google image search of that term. Must confess I'd never heard of the stuff, but that does explain the white inner jacket, no SWA glands, tight bend radii and small diameter.
So much for using armoured cable for the outdoor cable run then!