Veritas R8 keypad

[Willdd]

I have a Veritas alarm fitted with two R8 keypads. One at the front door and one at the back.
I want to remove one of the keypads. This has four wires connected.
Do I simply disconnect the wires and tape up or is there more to it.
Will

 

[telectrix]

your best bet is to get a local alarm guy/electrician to do this simple job. if you get it wrong you could damage the control panel and end up with an expensive repair/replacement cost.

 

[Spoon]

Hi Will,
If you have had dealings with alarms before then have a look at the install manual on the site below. Sheets 7 & 9.
http://www.spyalarms.co.uk/wp-content/uploads/2010/10/Veritas_R8_manuals-1-.pdf

But as Tel says, to be on the safe side get a local alarm guy/electrician to do this job.