I am looking for the connector for this rotary position sensor. The sensor is originally normally used for an EZ-GO golf cart as the throttle position sensor. However, I am using for a different project and need the connector. I have searched and searched and search with no results. Is there any chance anyone here recognizes it and can identify it? Thanks.
Discuss What type of connector is this? in the UK Electrical Forum area at ElectriciansForums.net
Share this page
- Reaction score
- 1,684
Reply to What type of connector is this? in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
Hi everyone
We have some 10mm PCB RGBCCT strips (6 terminals/wires) being installed in the kitchen under the worktops
However electrician is...
Hi All,
We've recently moved to a new build where the HMDI cable for the TV etc. are pre-fitted in the cavity of the wall. One end of the HMDI...
I recently purchased a rural property in Arizona. The property receives power from APS, the local electric utility. Power arrives from the...
I am trying to find some connectors, male with female contacts, supposedly IP67 known as 07A11, I am only looking for 4 or ideally 6 as per the...
Hi everyone. I am really puzzled by this, but I suppose there is an obvious answer / reason!
Anyway, Table I1 in the OSG says the mΩ/m value for...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.