Has anyone had any experience of installing surge protection devices?
I'm installing a 300A feed to a busbar chamber and then installing 3x3phase 12 way DB's above. What is the best way to incorporate the surge protection? I've been looking and it seems the only way to do it is for each of the...
Hi
Im a install solar for a small company and a new customer has asked about devices that put any export power into the immersion instead of back into the grid, have looked at several devices like solarimmersion and they say you just clip onto the main incoming tails, put it on a new 16A...
mark@27
Thread
circuit
devices
energy
immersion
power
remove
solar
technical
Just a quick question, in the general section of this form,
1. presence of under voltage protective devices, there are passive rcds on the cu and no dol starter, I've put n/a for this
2. Connection of single pole devices for protection or switching in line conductors only, all sockets used...
Hi all.
i have been asked to install surge protection devices for a lighting protection company on a regular basis.
but to be perfectly honest i dont know much about them.
are they easy to install?
are they expensive to buy?
what sort of price should i be charging to install a SPD?
could any...
Has anyone installed one of these devices and if so do you have any feedback on performance/reliability? I have been speaking with one of the people who developed the system (Terry) and they sound an ideal solution if they work as described and are reliable.
A customer has contacted us...
IronLiver
Thread
controls
device
devices
immersion
immersun
people
solar
system
Hi, I'm new on here and am having a 4kw pv system installed this week.
I obviously want to get the most from my purchase and have been searching for ideas, one of the best things i can see is the immersun. Is there any other similar devices I should look at or do these type of devices work...
Hey guys I was hoping you guys could clear some issue up for me ive been asked to snag one of our properties that has be refurbed recently but not being a tester my rules and regs knowledge is a bit lacking.
So basically its all about spurs for isolation
1. spurs are required to isolate fridges...
Hi guys.
Who knows where i can get a simple explanation of these devices and how to use them. Yes i have looked at the big green book [ sec 443 ] and i am struggling.
Reg 443.2.1 says that if no overhead lines supply an installation then no additional protection [S.P.D.] is needed as long as...
Hi lads tried a quick search nothing came up, hope you can help, the IT dept has asked me if it is feasible to fit an SPD in the tails before the CU to protect the whole building against V spikes, anyone have experience of knowledge of these ?
Thanks Lads
J
Was talking with a fellow spark (young chap) tonight and he was telling me about many times he couldn't achieve satisfactory Zs so he just doesn't bother cos the circuit is RCD protected. I said that the RCD is a secondary line of defense....the MCB should still bloody work (in fact it should...
Hello, I've heard that you can't put too many devices on 1 wall outlet like you can't run your computer, refrigerator, oven and a bunch of other devices that need a lot of power... why is that? Why do you have to slit them between different wall outlets? I'm confused....
Can any of you guys help on this please?
We have one of the above that was installed as the quoted Power One inverter wasn't available, however the Power One should have had their Bluetooth Graphic Display included.
Is there something similar for the XS3200, or alternatively is there a way to...
Does anyone know if there are any wireless data logging/ monitoring devices for the eversolar? ideally i want to check it remotely as i rent the house out but generally want to just check occasionally its actually working so im not wasting any of the sunshine!
Ive heard of the solar eye but...
Hello, I would be grateful if anyone could check my answers for those two questions and see if it's correct or not?
State the
a) tests for insulation resistance to be undertaken on a 230V circuit containing surge protection devices which cannot be disconnected
Test between L-E, L-N and L-N
b)...
Morning Guys
I know that if a 100mA RCD is followed by a 30mA RCD, the 100mA needs to be S type.
If a 300mA RCD is followed by a 30mA RCD (Farm installation) does the 300mA need to be S Type?
Cheers
Pete
Piratepete
Thread
between
devices
discrimination
fault
rcd
rcds
upstream
Apologies if this question has been done to death elsewhere.
Where would i find the time/current curves for BS3871 MCBs?
BS7671 only illustrates graphs for fuses and bs en 60898 and 61009 devices
I am trying to find out how long a 45 amp bs3871 mcb will withstand about 50-55 amps for on start...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.