Can anybody please offer any guidance with the following problem.
The power button doesn't work but when turned off at the socket, left a few seconds and turned back on, the lights briefly come on.
The history so far is here.
Hi there, I have purchased a machine from Europe. It is 380v. Our usual electrician is unsure how to install and whether we need a transformer. Can anyone help?
If we do need a transformer can someone please point me in the right direction as, so far, layman's googling has failed me.
Thank you...
I have a machine which is wired as 3 phase neutral and earth and is 15.1KW, there are no 415v components and all components are 230v, so effectively it is using 3 single phase circuits, however I have always carried out the circuit breaker calculation based on the 415V potential, I.E> 15120W...
Two of us have had a shock from a lead that had been disconnected from a Singer sewing machine several hours earlier.
The machine is fairly new and not been heavily used.
The shock was definitely stronger than just static.
My concern particularly is that this is a machine being used with...
Hi
I run a mobile coffee hut and have just bought a new coffee machine and new 7.5 KW Generator.
The coffee machine is on 13 amp plug but requires 32 amp feed. I used it on weekend on 16 amp feed off Genny. My question is can I connect machine direct to Genny (ie not through hits fuse box) and...
Hi all,
Wondering if anyone could take an educated guess as to the source of the issue. My suspicion is that the switch/contact that registers a closed lid is faulty, or perhaps the controller circuit has failed somehow. But I have zero experience with washing machines, so my opinion counts for...
Hi guys I work for a small vending machine company and at this present time they supply power to a unit using an extension lead shock I know it’s not the most ideal solution but I was thinking that I need to redesign the supply systems inside the unit
They get the supply from a plug socket which...
Anyone seen a non-standard mains plug like this on a standard domestic washing machine? Why would you do it? Any reason not to replace with a standard 13A plug?
just wondering what are people’s recommendation on labelling machines?
I’ve been looking at the following from screwfix:
https://www.NoLinkingToThis/p/brother-pte110vp-electricians-label-printing-machine/3453x
Aside from that one they jump to £80 and then to £170
I'm sure its been asked a thousand times but I can't seem to find it.
Just moved into new house and plan on installing a compact dishwasher. Unfortunately there is only one socket available which currently has the washing machine plugged in.
How awful would it be to plug a 2-way 13A block plug...
I have a Dishwasher and Washing Machine (both several years old) both plugged into a 4 way gang. They are on a 16Amp RCD with other appliances also on the same circuit.
When both are turned on at about the same time, about 5 mins after turning on they will both turn off completely, as if they...
Hoping some of you industrial gentlemen can help me with an enquiry.
My company (based in Sydney, Australia) has been asked to design and build the electrical controls for a CNC machine destined for European customers. The programming is being handled by our client, we're just building it.
If...
Hi Guys,
we are a charity and we have have been donated a washing machine it is a industrial washer.
In our premises we have both 3 phase and single phase.
the machine can work on both phases, with some adjustments.
this machine has been converted to single phase. was working perfectly...
im trying to add an emergency stop to this machine i am thinkin break between terminal 2 on the crabtree starter to drop the coil out ...
can someone confirm please?
When my washing machine (7 year old ) was running yesterday it trip the breaker ( that one ,first on the left , RCD i guess?!) and no power in home. We reset the trip and the same happened twice more (took me a ittle while to realise it was the washing machine!). The socket is OK, and I presume...
Had an interesting fault today. Don’t know if any of you like working out problems, but anyway.
A traveling saw, Lenze servo controlled travel, Servo speed is controlled by encoder. Saw blade is controlled by VFD.
Problem:
Servo travels to over travel limit very jerkily when turned on & saw...
Our new washing machine came with a power cable that is not long enough to reach the power socket which has been installed under the kitchen sink (that's where it was when we first moved in.)
I called Indesit and they told me they come like that because regulations state that the power socket...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.