I had this bought for me for Christmas. The description says its made by Metrel and is GS38 compliant. When I received it, it doesn't says Metrel anywhere on the product or the box. The probes have around 15mm exposed, when you unscrew the covers there is slightly less exposed, possible...
ok, following a call out to a house that had attempted to change their own light fitting, and obviously got lost,
Showed up to find three cables sticking out of ceiling, ( immediate thought, perm in, perm out, and switch cable, simple)
Upon testing, cable 1 : 230v in , ( perm in)...
Greetings all.
My next door neighbour has asked me to put a socket outside his garage but at a very funny height.
It will be used at Christmas to plug outside flashing and dancing lights and decorations into.
I think he wants to light up the whole of the front of his garage.
The thing is he...
As a specilaist insurance broker within the renewable energy/solar sector we are concerned about the increased pressure and risk put on solar/pv installers up until the 12th December. I doubt very much that this has even registered with the govt and Mr Barker that the risk of injury to solar...
Evening all,
wondered if anyone's come across a combined unit to do both functions - I thought Ei did but now think I'm mistaken.
It's not a show stopper, but it would make for a much less cluttered ceiling!
Cheers, R.
Hi guys,has anyone heard of or used MCS QUALITY SYSTEMS ? they say they can supply complete quality manuals/system. Im thinking of getting in touch with them but thought id ask for advise first
Cheers Tony
tjcelectrical
Thread
knowledge
management
mcs
quality
spend
systems
thought
Ok lads ive just loaded up the van with my last 20 zn shine 195w panels rails and inverta! yes heavy work ! yes its a job i priced months ago so whent in tight:( but my word is my bond so it will be installed TOMOZ) now when all this started KITS started to fly off the shelves i rang my banking...
i have been asked to install 10 sockets and 12 spotlights above a cafe which has been derilict for years, what the dude has done is plasterboarded one room and hall in this derilict building above his cafe.. he said i can surface mount the sockets and the spotlights i can rip up floor above to...
This is amazingly accurate.
I thought that Google Earth was impressive, but this is even more precise. It is a little disconcerting to know that they can find you anywhere, but check it out.
This technology uses your IP address and can find the exact location of any Internet user in...
Check this out - changes on 8th December are possible, 21p FIT - yikes!Fact Sheet on the proposed changes to Solar PV Feed-in-Tarrif rates / PDFs / Generate your own energy / Media - Energy Saving Trust
Hi all,
I have put a new cooker feed into a customers house, i went back today to second fix and test but this is where it goes ---- up! well testing i got-
Ze = 0.25
PFC = 966
r1+r2 = 1.22
insulation resistance of >500
I thought the r1r2 was a little high but its on a 10mm so thought it...
I went to a job recently to change some bathroom lights, as the originals were starting to degrade, the client also wanted some extra lights, so I changed them all for IP65's. So, turn the lights on, turn the MCB off, test, lock it off and away we go!
So, once the new lights where wired, I...
Hi Guys & Gals,
Was reading an advert on a job website for an "Electrical surveyer". The job details were to go to customers homes and do an initial safety inspection and explain legislation which is fine but it then says "to offer a part p electrical inspection". Now when I did my 2391, I dont...
My son, also a spark, was asked by one of the girls in the office to check her electric shower - had been working intermittently.
He turns up at the flat, checks the circuit breaker (all ok), checks the pull cord switch (again ok) and turns his attention to the shower unit itself.
He takes out...
hi guys, sorry took my time to get on and say hi!!
as you prob guessed im dave
im a sparks from essex though i do work all over.
looking forward to joining in a bit more on here now im working days not nights.
cheers guys
We are seriously looking at installing a PV system. Our house faces roughly south west and, at the start seemed to be pretty shade free. We've had two surveys done and both have highlighted shading due to the property next door and a large chimney on the front of our property. This is perfectly...
You may already know this but I thought I'd put it up as if I had heard this 4 weeks ago, I could have saved myself £400.
If you have 2 or more months left on your registration, if you transfer your membership to ELECSA, they waiver their joining fee of (£444 with VAT).
I don't know if the...
electromonkey
Thread
certification
certsure
elecsa
registration
scheme
thought
Hi im a qualified electrician am looking to get part p registerd to enable me to do some private work on weekends, was wondering if elecsa was a good place to start?
bgcurry
Thread
certification
certsure
elecsa
part
part p
scheme
their
thought
Ok guys had a day and half today....Y plan Honeywell room stat, 7 day prog 2 channel.
Worcester boiler with over run......
Some how the mains L/N got cross and had few 3 amp fuses blow in spur before we established issue...boiler fuse was ok though and once established that a donkey had...
Just received a call asking to look at a job working alongside another spark, I only class myself as a domestic installer.
The lad asked to give him a hand on a newbuild installation of a student accomadation block, he told me that it will be run in conduit, singles.
My first thought was...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.