- Reaction score
- 5,382
Was IR testing carried out through this RCD?
Discuss Cannot get RCD test to work? in the UK Electrical Forum area at ElectriciansForums.net
Was IR testing carried out through this RCD?
Glenn!! You're going to have to go back through the thread!! I did all tests and gave all results... Zs, IR, Continuity of CPC, pi R sqared, E=MCsquared and the meaning of life are all in this thread somewhere... Just look!!
Marquez is the boy at the moment. Rossi still in there, even Edwards and Hayden still going.Well you haven't done that to me so don't worry about it MM, it was nothing but a discussion from where I was sitting.
Enjoy the Moto GP, is Valentino Rossi still riding? Obviously you can see that I know three tenths of bugger all about it but my brother rates him very highly.
I'm off to finish watching the film now...
cheers for all the input guys.
so in other words you shoved 500V through the RCD....Glenn!! You're going to have to go back through the thread!! I did all tests and gave all results... Zs, IR, Continuity of CPC, pi R sqared, E=MCsquared and the meaning of life are all in this thread somewhere... Just look!!
so in other words you shoved 500V through the RCD....
may just not test at all....Thought RCDs were good for 500V apart from RCBOs on which you have to remember to disconnect any functional earth? If the RCD has been killed, wouldn't that result in a failed test rather than refusal to test?
Here Now go and calm down your getting all heated under the collar lolWhat film are you watching?
Schindlers Fist?
Womb Raider?
Snow white does seven dwarfs?
School of cock?
Gangbangs of new York?
You are not a lot of help are you.
If the HHD is testing with a fan connected in circuit there's a good chance a capacitor is skewing the meter.
may just not test at all....
personally i think theres either a lack of understanding about how to carry out the test competantly from the OP (hardly surprising)
or theres no continuity of CPC someware......
if theres any exposed pipework nearby the OP could prove the no continuity of CPC easily by connecting the earth croc to extranious whilst testing the RCD.....if it lets go then i would dare say its a CPC thing....
Reply to Cannot get RCD test to work? in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.