J
JCE
there is a free 4 page guide at easylifetools that can be viewed and printed off
Discuss Conduit bending guide in the UK Electrical Forum area at ElectriciansForums.net
Yes Lenny , the only difference is, your missing page 4 , of my work please view it and have a look , p.s, you done quite well out of it 624 thank you s , for putting up my work i have now made it free to help out and give something back , i also intend to make the trunking guide free in the next few days , unless you have a copy of that as well, please be a gentleman and take the 3 pages off . But can i give you 10 out of 10 for effort. i hope you are still laughing because i am , cheers jonathan
alarm man , you are correct , most of the methods were used 50 years ago , but 32 years ago i was never taught those methods , doing my apprenticeship partly at keighley college , it wasnt until i went back to college say 15 years later and learned some of the methods used on pages 1 & 2 , i then went onto expand on them using the spirit level as i had seen the plumbers /heating engineers on site using , and i expanded on these and other methods, and over the last few days decided to help others , in the hope that they will better my methods and pass on the info , its as simple as that,,,,
mate you want to go on a site and watch old pro,s bend like masters,a squint here,a tilt of the head there and,if by magic it fits to the mil,no rulers no levels just expierence,you cant better that im afraid
So, you want people to print off the info and are telling them to do it, but want it removed from this forum?
A bit weird that.
Why didn't you just ask to be acknowledged as the author on the post Lenny put up? To be fair, Lenny would not have known who's they are, they are not watermarked and do not have any warnings not to duplicate or distribute!
so , here goes , you all made me feel welcome tonight, thank you, i have been kicked ,shot so to speak , but i still have the trunking fabrication guide to upload and give away , so lenny ,johnnny etc... what do i do knowing that this guide just like the conduit guide will /should help newcomers , or perhaps mark ,lenny johnny perhap you could help the newcomers new starter to the industry or am i expecting to much,
It’s a pity this thread wasn’t deleted as spam when it started. It’s nothing but blatant promotion for a profit making web site.
Ruston you havent fallen for it , just pass on the 4 pages to your mate ,
combined with hilmor record Irwin tools none payment of royalties for 1500 bush spanners
Reply to Conduit bending guide in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.