W
wolfiehogan
hi guys i have to do an ir test tomorrow but my problem is that there are appliances connected as it is an existing installation. basically i want to test an installation but has a plc connected that controlls alot off the circuits that are in the fuseboard. if i join the l + n and test to earth will this save the plc compondments from damage.
as i did this the other day and there was a fluoresence light connected and it brought down all the readings and when i dis connected the light everything was fine. hope some body can understand
as i did this the other day and there was a fluoresence light connected and it brought down all the readings and when i dis connected the light everything was fine. hope some body can understand