P
pads
The wiring in the house is split into separate circuits each with their own RCBO for
3 for lighting (separate for ground floor; upper floor; and basement)
3 for power (again as above)
1 for cooker
1 for shower
2 for fridge/freezers
The problem exists only on the ground floor power circuit.
Whenever the vacuum (two core) is switched on in any socket, the RCBO trips. It's not the vacuum as it dos not happen on the upper floor. I have even tried an angle grinder- thinking maybe induction issues - but it does no trip.
Occasionally the circuit trips on its own, or if the computer is switched on.
I've checked all the sockets for damaged or trapped wiring, but nothing found.
Does anyone have any suggestions please.
Thanks
Peter
3 for lighting (separate for ground floor; upper floor; and basement)
3 for power (again as above)
1 for cooker
1 for shower
2 for fridge/freezers
The problem exists only on the ground floor power circuit.
Whenever the vacuum (two core) is switched on in any socket, the RCBO trips. It's not the vacuum as it dos not happen on the upper floor. I have even tried an angle grinder- thinking maybe induction issues - but it does no trip.
Occasionally the circuit trips on its own, or if the computer is switched on.
I've checked all the sockets for damaged or trapped wiring, but nothing found.
Does anyone have any suggestions please.
Thanks
Peter