Hi, I am burying wire from the outside meter panel to the new 100amp sub panel inside a garage. The run is 20' long. Is 2-2-2 Aluminum URD Cable good enough or do I need the 4/0-4/0-2/0 Black Stranded Aluminum Triplex URD Cable? Anyone that can answer I would greatly appreciate it.
Discuss Running Aluminum URD Cable in the DIY Electrical Advice area at ElectriciansForums.net
Reply to Running Aluminum URD Cable in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
Hello, this is my first post here. I have a little experience with most types of household wiring through a decade of DIY remodeling, and...
I am adding a 60 AMP subpanel for a detached garage/workshop with a 200 foot underground conduit run from the main panel to the sub panel...
I’m running wires to the basement for future basement finishing. I’d like to add two circuits of outlets (one on the finished side and one on the...
Hi,
I have a Victron Multiplus-II 5kVA inverter/charger with Pylontech US5000 batteries installed in my house along with a 6.8kWp PV array and...
Hi folks,
I have been researching the NEC and forums on the Internet in preparation for adding an RV subpanel electrical hookup. I could use a...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.