Search the forum,

Discuss Show and Tell in the Electrical Tools and Products area at ElectriciansForums.net

E

eskimo39

I am a geek and I admit it, am curious as to what you guys carry day to day so have started this thread in the hope a few of you post some picture up. Here is my daily tool bag:


THE FRONT

front.JPG


FRONT CONTENTS

front_tools.jpg





BACK

back.jpg


BACK CONTENTS

back_tools.JPG
 
OH god it's on now :D bit late to be rushing out to the van with camera I feel, will have to compile an album in the next few days :D
 
Last edited by a moderator:
What kind are the pairs of grips in the first pick? Knipex?

Also is it a Bacho socket set in the second pic. If so, how are they for quality?
I only use Knipex now, have tried a few brands but get on with these. I only bought the small socket set to keep in my bag, really only gets used for those annoying round head bolts that come with outside and bathroom light fittings. I also have the large Bahco set but it never really comes out of the van so cannot really comment on quality. Seems very well made though and can be bought for a good price.

Pennywise, what do you mean it's too late? If you had your new headtorch you would be looking for excuses to root around the back of your van in the middle of the night ;)

And yes Lenny it is that free screwdriver, used it a few times and seems really good although most people on here don't rate them.
 
Last edited by a moderator:
It's coming tomorrow:), could have used it today really dark basement flat with no ceiling lights and fault finding on the power no lead light!!!!!:( mouth really aches this evening holding a torch in it for 10 hours is a bit of pain. As for last night was being totally lazy, I've got a lit back to the van came with the Bott racking 3 flu strips it's like daylight in there couldn't live without them!!:) Nice bag and tools by the way still laying mine out at the mo:D
 
Last edited by a moderator:
Rather Obsessive I'm afraid. I do double up so other guys have no excuses because they've forgotten stuff, and I have one set in the tool belt whilst on the job and leave the other set in the bag on the ground floor so If I forget to bring my belt down I don't then have to go up again :D
 
we could do smashed power tools, my blooming cordless right angle dewalt is going to get chucked off some scafold very soon.....utter rubish
 
Funny that this thread's been started as it' s something I was just wondering about.

What other kind of bits and bobs do you carry though? You're not going to convince me that you've all got vans with one toolbag in them.
 
Fellow tool lovers ! i must show the mrs these pics when she says NO MORE TOOLS ! its my birthday sunday 17th and i feel another tooltime comming on ! will post some pics of mine asap ! great pics on here ! i wont them ! i want them ALLLLLLLLLLLLLLLLL ! i need help ! ok i remember now ! sorry ! MY NAMES TONY AND IM A TOOLAHOLIC !
 
Not just the one tool bag :D

And it all fits in a connect with racking

Blimey :eek: there's a fair bit of kit there. I take it that the carpet with the dog footprints on goes at the bottom and the dog ballances on top of it all :D:D:D

Have to agree though - I WANT IT - ALLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL!!!!!
 
I would love one of those XXL Veto Propac open top toolbags. Not sure I can dish out £150 on one though. I'd quite like to see the layout of some of you guys van racking also really. I'm quite happy with the tidyness of my toolbags themselves but the back of the van isn't so great hehe. Show some van pics :D.
 
Some of the hilti stuff is 3yr old. I give them a clean every couple of weeks with WD40 brings tools up like new, If I could I would bathe them in the finest oils and lubricants every night haha:D
 
Some of the hilti stuff is 3yr old. I give them a clean every couple of weeks with WD40 brings tools up like new, If I could I would bathe them in the finest oils and lubricants every night haha:D
Thanks god it's not just me, my wife thinks I am mad. Especially late at night when I am sat downstairs cleaning plaster dust off my drill with a toothbrush. She asked me the other week if I realised I cleaned my tools more than I clean our children. She was right of course, but I would never agree ;)

I have to admit however that your tools are way out of my budget. I use:

Bosch 36v Lithium Cordless SDS
Bosch 36v Lithium Combi Drill
Bosch 14.4 Lithium Drill Driver (Although that has been lost today down a cavity, and only 2 months old)
Bosch 110v Corded SDS
Bosch 110v Circular Sav
Fein 110v Multimaster
Stanley CLL Laser
Fluke 1652b Multimeter


Would love some Hilti gear but couldn't afford until I am fully qualified (or sell a kidney).

View attachment 739

Not just the one tool bag :D

And it all fits in a connect with racking
What is the yellow thing in the box to the left of your Megger and Lable maker?

Also is that a mini circular saw on the left?
 
Last edited by a moderator:
Remember the tools don't necessarily make my work any better ;). If I'm being totally honest I've used all the Bosch stuff and it's great,my old boss had the 36v SDS amazing drill just I think they need to bump up the amp hr rating of the batteries a little but saying that it was the first Lith cordless on the market and he got it on the release week, it blew everything away!!. I would say also the Hilti stuff isn't that much better made than the Bosch stuff probably made in the same factory in germany in reality. The only major advantage is the aftersales service which is incredible, being self employed I can't do without tools for long so for me the extra costs are justifiable.

The yellow thing in the box is the fluke cable and fuse finder DO NOT BUY IT!!!!! IT'S A WAIST OF MONEY. Just another of those this seasons must have tool :(

The cordless saw is a panasonic metal cutting saw it's really small and I've got both metal and wood blades so I can cut boards and unistrut and metal trunking, you can do this with any saw really it's just my M8's dad owns a large duct and air con company and his guys swear by these They do a lith version now "must resist must resist!!":eek:

Shame about the Bosch down the cavity I hate losing tools work comes to a standstill when something goes missing
 
Last edited by a moderator:
good tools looked after last for ever. very envious of all the shiny stuff on display. I seem to have the same 4 screwdrivers I have had for ever, no wait they jusy look like that because they are currently burried under dust (the tools, bag and box are due a clean when the current job finishes and they are all home again).
 
Haha i know what you mean lockhes. Great thread though.
Fair play Eskimo39 that is a nice tool bag. Pennywise your hand tool collection looks like a tool shop display board.
Proper jealous.
 
Got the proving unit in the megger case with the printer in the other picture, never fear I've got one :D. The cable locator is Ok for locating cables if you have a rough idea as to the run,but it gets put off the scent quite easily.I bought it originally for finding breakers in offices were they have computers and essential services It got close to the right breaker but always found it to be one out which can have some interesting affects on office workers when they loses their work :D. I don't think it's worth the money if it were slightly cheaper I could put up with the niggles just my opinion.
 
Last edited by a moderator:

Reply to Show and Tell in the Electrical Tools and Products area at ElectriciansForums.net

Similar Threads

Hi All, this forum was incredibly helpful when I last posted. I'm a girlfriend (hoping to level up soon) to a man who is just starting his...
Replies
47
Views
3K
Hi All. Hoping for some advice please. I've severe arthritis in the hands (all three :flushed:) A large dollop of osteoarthritis but I'm also...
Replies
27
Views
1K
Saw this on Irish Consumer site (CPCC.ie) HERE Not sure about the rest of the UK but worth checking if you have one. Fluke Europe BV recalls to...
Replies
1
Views
1K
Hi all, Is there companies or people out there that can help source sub contract work as im not sure where to start. I know you get recruitment...
Replies
1
Views
540
Hi Everyone, My first post here, just a simple question. I currently get all of my work through word of mouth and contracts that I have...
Replies
14
Views
754

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock